05-16-2004, 22:54
|
#1
|
Guerrilla
Join Date: Jan 2004
Location: Rocky Mountains
Posts: 199
|
Slowly Unveiling new EGL products
All,
Here is a glock magazine /surefire E2E pouch I built - holds three G19 mags and an E2e in a 4 Pals wide package.
can also hold a Strider Tarani in a mag cell in lieu of a magazine.
Optional cell lids are available - or the loop velcro can be used to attach FLAGS etc.
http://www.geardo.com/images/EGL/pistole2e.jpg
More gear to come. and I will post here.
EGG
__________________
EGG sends
|
eggroll is offline
|
|
05-23-2004, 20:52
|
#2
|
Guerrilla
Join Date: Jan 2004
Location: Rocky Mountains
Posts: 199
|
some stuff
Several folks have asked in the past couple of months, what do I do - well lets just say its geeky stuff and my preference is to stay in front of this table thinking of new concoctions and ideers.
Part of my summer lineup - and before you ask, if you are not A/D USMC, dont ask for it. If you have the material or jungle stalker in hand, we can talk. http://www.geardo.com/images/EGL/sumstuff1.JPG
My Workbench/table
http://www.geardo.com/images/EGL/sumstuff2.JPG
My EGL Triple pistol pouch with a TARANI in a mag pocket.
http://www.geardo.com/images/EGL/tripletarani.JPG
__________________
EGG sends
|
eggroll is offline
|
|
05-24-2004, 17:40
|
#3
|
Asset
Join Date: May 2004
Location: Camp LeJuene area, NC
Posts: 11
|
Yes !
I've been asking myslf , " What does EGG actually do ?  "
.
Looking good there EGG-O ! Thanks for the link to this site .
Gene
|
High Speed is offline
|
|
05-24-2004, 17:53
|
#4
|
Quiet Professional
Join Date: Jan 2004
Location: Central TX
Posts: 1,390
|
First Lawyers, Then Knife Masters, Now Gear Masters. It seems that this site is attracting all sorts of useful folks
Edited to give credit where credit is due
Last edited by Air.177; 05-25-2004 at 08:24.
|
Air.177 is offline
|
|
05-24-2004, 17:53
|
#5
|
Quiet Professional
Join Date: Jan 2004
Location: Free Pineland
Posts: 24,805
|
Quote:
Originally posted by High Speed
Yes !
I've been asking myslf , " What does EGG actually do ? "
.
Looking good there EGG-O ! Thanks for the link to this site .
Gene
|
Gene:
Welcome!
Met you in the airport on the way to the SHOT Show this year.
Feel free to put up a link to your gear site, so that we can compare, contrast, and beg for group deals.
Egg does make some very trick stuff as well though!
TR
__________________
"It is not the critic who counts; not the man who points out how the strong man stumbles, or where the doer of deeds could have done them better. The credit belongs to the man who is actually in the arena, whose face is marred by dust and sweat and blood; who strives valiantly; who errs, who comes short again and again, because there is no effort without error and shortcoming; but who does actually strive to do the deeds; who knows great enthusiasms, the great devotions; who spends himself in a worthy cause; who at the best knows in the end the triumph of high achievement, and who at the worst, if he fails, at least fails while daring greatly, so that his place shall never be with those cold and timid souls who neither know victory nor defeat." - President Theodore Roosevelt, 1910
De Oppresso Liber 01/20/2025
|
The Reaper is offline
|
|
05-24-2004, 17:55
|
#6
|
Quiet Professional
Join Date: Jan 2004
Location: Free Pineland
Posts: 24,805
|
Quote:
Originally posted by Air.177
First Lawyers, Then Knife Makers, Now Gear Makers. It seems that this site is attracting all sorts of useful folks
|
Lawyers? Useful?
Hmm, well I have never put those two words together, unless it was in a class on survival cannibalism, but if you say so....
TR
__________________
"It is not the critic who counts; not the man who points out how the strong man stumbles, or where the doer of deeds could have done them better. The credit belongs to the man who is actually in the arena, whose face is marred by dust and sweat and blood; who strives valiantly; who errs, who comes short again and again, because there is no effort without error and shortcoming; but who does actually strive to do the deeds; who knows great enthusiasms, the great devotions; who spends himself in a worthy cause; who at the best knows in the end the triumph of high achievement, and who at the worst, if he fails, at least fails while daring greatly, so that his place shall never be with those cold and timid souls who neither know victory nor defeat." - President Theodore Roosevelt, 1910
De Oppresso Liber 01/20/2025
|
The Reaper is offline
|
|
05-24-2004, 17:55
|
#7
|
Consigliere
Join Date: Jan 2004
Location: Free Pineland (at last)
Posts: 8,824
|
Quote:
Originally posted by Air.177
First Lawyers, Then Knife Makers, Now Gear Makers. It seems that this site is attracting all sorts of useful folks
|
Well, the last two groups are useful, anyway.
|
Roguish Lawyer is offline
|
|
05-24-2004, 18:52
|
#8
|
Quiet Professional
Join Date: Jan 2004
Location: LA
Posts: 1,653
|
Welcome Gene.
Calling the Blade and Gear Masters we have on here "makers" is like calling TS, AM and TR "soldiers". Yeah, technically its correct, but there's sooooo much more to it than that.
Our lawyers are ok for college boys...
__________________
Somewhere a True Believer is training to kill you. He is training with minimal food or water, in austere conditions, training day and night. The only thing clean on him is his weapon and he made his web gear. He doesn't worry about what workout to do - his ruck weighs what it weighs, his runs end when the enemy stops chasing him. This True Believer is not concerned about 'how hard it is;' he knows either he wins or dies. He doesn't go home at 17:00, he is home.
He knows only The Cause.
Still want to quit?
|
NousDefionsDoc is offline
|
|
05-24-2004, 19:06
|
#9
|
Asset
Join Date: May 2004
Location: Camp LeJuene area, NC
Posts: 11
|
Reaper ,
Trying to put faces with usernames . Were we also BS'ing at the luggage merry go round ? If it was , it's a pleasure to trade words again . Met so many people and had some chase my poor ole crippled self to a foot race around the SS as well .
EGG and MM told me about this site awhile ago , but had very little time to frequent the forums lately . Going to have to make time for sure !
Link , where ? Don't want to step on anyone toes . I went straight to the gear section to check in . Can I place my avatar up ?
Lawyers are useful .......to some extent !  A few of them got me off the hook from time to time . Other than that , they are a target of oppertunity . You know .... picked on ! I got 2 cousins that are lawyers , can't stand them . LOL!
Thanks Reaper and NousDefionsDoc for the welcome!
Last edited by High Speed; 05-24-2004 at 19:08.
|
High Speed is offline
|
|
05-24-2004, 19:17
|
#10
|
Quiet Professional
Join Date: Jan 2004
Location: Free Pineland
Posts: 24,805
|
Gene:
At RDU on the way out, then at the carousel in Vegas. Longest baggage wait in history.
Okay, here is the link to Gene's site:
http://www.highspeedgearinc.com/
Check out everything, including the "What's New" section. The suspenders are a good place to start.
Avatar takes a few posts first unless an admin wants to work some special favor.
I think that you can feel free to put up pics of any gear that floats your boat, minding the fact that some of us may access this site from work.
Understand that there are many gear geeks here, but very few airsofters, if you get my drift.
TR
__________________
"It is not the critic who counts; not the man who points out how the strong man stumbles, or where the doer of deeds could have done them better. The credit belongs to the man who is actually in the arena, whose face is marred by dust and sweat and blood; who strives valiantly; who errs, who comes short again and again, because there is no effort without error and shortcoming; but who does actually strive to do the deeds; who knows great enthusiasms, the great devotions; who spends himself in a worthy cause; who at the best knows in the end the triumph of high achievement, and who at the worst, if he fails, at least fails while daring greatly, so that his place shall never be with those cold and timid souls who neither know victory nor defeat." - President Theodore Roosevelt, 1910
De Oppresso Liber 01/20/2025
|
The Reaper is offline
|
|
05-24-2004, 22:35
|
#11
|
Guerrilla
Join Date: Jan 2004
Location: email: militarymorons@gmail.com
Posts: 153
|
welcome to the board, mean gene
eggo, nice work bro.
cheers,
MM
|
militarymoron is offline
|
|
05-24-2004, 23:03
|
#12
|
Guerrilla
Join Date: Jan 2004
Location: Rocky Mountains
Posts: 199
|
FWIW I think "Right Through There" would be an excellent tagline for Gene.
EGG
__________________
EGG sends
|
eggroll is offline
|
|
05-25-2004, 04:59
|
#13
|
Asset
Join Date: May 2004
Location: Camp LeJuene area, NC
Posts: 11
|
Quote:
Originally posted by eggroll
FWIW I think "Right Through There" would be an excellent tagline for Gene.

EGG
|
Egg ,
It could have been worse . Like "Killer Diller" , or " You know , I tore it up as fast as I could " . And some my mom washed out my mouth out with soap for saying .
Reaper , remember vividly . Not my longest waite ever at a carousel . In Japan , on my way to Manilla back in '79 . and at San Antonio in '80 , where thay had to deliver my luggage to me 2 days later .
EGG , I made the HSGI Power Thong , You made the Dress , Which one is the future Mrs. Egg going to wear ? Mrs. EGG needs gear !
By the way , the pictures I sent you , Patent was applied for and I got pictures of new configurations been playing with . Will be talking with Patent "LAWYER" ( see not al lawyers are bad ) , or is it better to sat "Attorney " ? ,,,,to see when it is safe for a release date .
Gene
|
High Speed is offline
|
|
05-25-2004, 07:25
|
#14
|
Area Commander
Join Date: Feb 2004
Location: Phoenix, AZ
Posts: 1,691
|
Welcome Gene.
I completely agree with Egg "Right Through There" is a perfect tagline.
|
Smokin Joe is offline
|
|
05-25-2004, 08:21
|
#15
|
Quiet Professional
Join Date: Jan 2004
Location: Central TX
Posts: 1,390
|
Quote:
Originally posted by The Reaper
Lawyers? Useful?
if you say so....
TR
|
At Least Samoan ones are
Last edited by Air.177; 05-25-2004 at 08:25.
|
Air.177 is offline
|
|
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
|
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
All times are GMT -6. The time now is 00:02.
|
|
|