Quote:
Originally Posted by Ramirez
but you don't want to be holding the weight of your head w/ your neck to get a good sight picture.
|
Yes, but I should point out that: 1) The stocks I'm using are cut down so my rifle fits like a glove for off hand or sitting 2) If I have to cock my head it doesn't fit right and will delay alignment for a fast shot. Meaning: I should raise the rifle and it'll be were it should be, no stretching or shifting my head. Can lean in, raise it, and will be aligned on the sights or scope. My cheek (between mouth and nose level) gently touches the stock. Doing this I can still hit a dime with 22-250 or 243 at 50yrds (or quarter at a 100) with 4x4 nikon standing, someday's just a dollar or a tea dish...grin
When checking a rifle I put it in a reinforced cut out cardboard box with towels and rags (high tech), and have to look through the sights or scope with my head cocked in a prone position. (and sometimes get a fat lip too). The reason is that it creates a somewhat consistent barrel vibration as if I were holding it. Kinda like sighting in your rifle w/bipod on sand then expecting the rounds to land in the same place when shooting on a concrete platform. You'd want to be shooting it on a sand platform, least that's my experience with bipod's. Sorry about the detour...
The last time I shot regularly prone was when completing the NRA sharpshooter test, at age 12, other than the above box checking/sighting in or a quick field check. If what you're doing works (ie. alignment) and is consistent, do what Long Range suggested as he has much more experience shooting prone and teaching others than I do.
Hope that clarifies it some.
Hybrid Mode
