Go Back   Professional Soldiers ® > The Pipeline (Special Forces Training) > 18B

Reply
 
Thread Tools Display Modes
Old 08-02-2012, 18:48   #76
The Reaper
Quiet Professional
 
The Reaper's Avatar
 
Join Date: Jan 2004
Location: Free Pineland
Posts: 24,797
Quote:
Originally Posted by gus7 View Post
the trigger set up ,controls made of plastic and magazine [its not a m-110 which in the system ] a little rework is needed before gen issue ...
Gus, you have not complied with any of the rules and stickies, we have no idea who you are.

Please fix this by COB Sunday.

TR
__________________
"It is not the critic who counts; not the man who points out how the strong man stumbles, or where the doer of deeds could have done them better. The credit belongs to the man who is actually in the arena, whose face is marred by dust and sweat and blood; who strives valiantly; who errs, who comes short again and again, because there is no effort without error and shortcoming; but who does actually strive to do the deeds; who knows great enthusiasms, the great devotions; who spends himself in a worthy cause; who at the best knows in the end the triumph of high achievement, and who at the worst, if he fails, at least fails while daring greatly, so that his place shall never be with those cold and timid souls who neither know victory nor defeat." - President Theodore Roosevelt, 1910

De Oppresso Liber 01/20/2025
The Reaper is offline   Reply With Quote
Old 01-10-2013, 19:18   #77
fox33c1
Asset
 
Join Date: May 2011
Posts: 18
So I have a tendency to buy a civilian example of what ever the team gets issued to it (92f, M4 clone, rem700 with Mk4, etc) being a guard guy the range time is not nearly enough.

So once the Mk 17 Scar-H got to the cage, I went and bought a one (scar 17S). I saw no reason to ever buy a Mk-16 Scar L until we universally switched over and dropped all M4's.

The things I instantly noticed have already been elaborated on extensively ( charging handle, etc) and I will not go to far into those.

There was two things that really bothered the shit out of me. The lower being polymer and the magazines.

The magazine is a rather expensive and fragile item. I have dropped them on concrete a few times and they lose structural integrity pretty quickly. I seen them dropped as few as 7 times and exploded. Retail on these has always hovered in the $65-75 range. The KAC m110 mag and the 308 PMAG are so much better items

The polymer lower is far and away the weak spot of the whole system IMO. They flex, twist, deform and break with extensive use. I have pulled a lower off of a mk17 and when laid on a flat surface the twist in lower was painfully obvious. It was like a bad table that would wobble because of uneven contact surfaces. I figured that it was a matter of time and abuse before my civilian SCAR suffered the same fate.

I wished some one would make a billet lower that would accept standard magazines. God was obviously listening, because I went to NTOA and came across the solution.

A company called Handl Defense was there and they have a billet aluminum lower that accepts KAC and Pmags. I bought one and love it. I've used it in 3-gun and tac rifle matches and not a single issue. They fit tight as a drum and use all the same parts. IMO we should get these on the Mk17, there is a difference between the civilian lower and mk17 lower they said and they are making them.

I am new around here, so I don't know if dropping a plug for a product is cool or not, but I do really like it. Both the Lower and the SCAR.

The SCAR is just like the M16 in 1964, it needs some things looked at and changed. But I think the SCAR has so much potential.
fox33c1 is offline   Reply With Quote
Old 03-22-2013, 15:26   #78
fox33c1
Asset
 
Join Date: May 2011
Posts: 18
check this out

http://www.youtube.com/watch?v=ifGfctIli6A

its an aftermarket metal lower for the scar .... maybe we can get a few?
fox33c1 is offline   Reply With Quote
Old 05-02-2013, 01:44   #79
fox33c1
Asset
 
Join Date: May 2011
Posts: 18
Well

I just figured I'd come back here and let you guys know what has transpired over the last few months.

I contacted the company that made this aluminum lower for the civilian SCAR 17S

After chatting them up I found they had an extensive program to improve the Mk17..since they are local... I stopped by

the SR25 magazine patterned lower that MAGPUL was OEMing the 25 round 7.62 mags to and it is made of a different alloy harder than 7075 aluminum ...I watched them hang 275 lbs off of it

a new buttstock hinge .. they figured out why they were breaking

a new forerail assembly that didnt cause 2nd degree burns, passed the cookoff tests in spec sheet with flying colors, and it adds more rail space

they also are looking at making the gun into some sort of LMG as well

with all of this I figured the project lead at the J8 would be ecstatic

so I showed these guys how to submit to the SORDAC

of course not intrested... I guess we are going a new direction

but since I am a guard guy now... I guess we'll have SCARs until I retire...
fox33c1 is offline   Reply With Quote
Old 05-02-2013, 08:44   #80
Froggy
Quiet Professional
 
Join Date: Feb 2008
Location: NYC area
Posts: 25
We have several MK-17's assigned to the team. We carry a mixture of MK-17 (short), M4 (10''), M240 and M249, all suppressed except the 240. Most of the time we drop the 240 and just carry the 249. We put the 6x ELCANs with a doctor sight on the SCARs and use them for a long range fires capability when we don't have a dedicated sniper system / SO position for the mission. We can consistently hit out to 1k meters with them, although you're lobbing that round in there at that range. The ELCAN also gives us good PID capability that the EOTECHs on the M4's can't provide. From my perspective, here is rundown on the SCAR:

Advantages:
-Longer range due to combo of 7.62 and optic
-Heavier stopping / destructive power

Disadvantages:
-Ammo capacity
-With suppressor, its pretty long, even with the short barrels
-Ergonomics different from M4-style weapons (re-training IADs)
-Heavier weight requirement with basic load

Bottom line: I think they have their place, but we wouldn't want to give up all our M4's for them.
Froggy is offline   Reply With Quote
Old 05-02-2013, 15:44   #81
mdpatterson
Guerrilla
 
Join Date: Feb 2011
Location: AZ
Posts: 123
What can on the 17's?

What can are you guys using on the 17's? I have my preference, but mine isn't seeing the type of use that yours is.

Mike
mdpatterson is offline   Reply With Quote
Reply


Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is Off
HTML code is Off

Forum Jump



All times are GMT -6. The time now is 22:57.



Copyright 2004-2022 by Professional Soldiers ®
Site Designed, Maintained, & Hosted by Hilliker Technologies