05-13-2006, 08:15
|
#16
|
|
Bladesmith to the Quiet Professionals
Join Date: Feb 2004
Location: Oregon, Land of the Silver Grey Sunsets
Posts: 3,886
|
Peregrino,
A midly complicated process I do here can be seen in the background of the pic you reference. Check out the little brass washers in the image you reference.
These are .015 inch thick and made by me from "half hard" brass sheet shim stock.
I first had to make a punch and die set that could produce the interior bore accurate to +.0000" and -.0005" of either .2188", .2500" or .3750" depending on the blade pivot bushing diameter.
After punching out the center hole, the square washer blanks are stacked onto a mandrel (made here too) on the lathe and turned for whatever outside dimensions the model of folding knife needs. Each folder has two different sized washers, small one goes on the lock bar side.
Last edited by Bill Harsey; 05-14-2006 at 07:31.
|
|
Bill Harsey is offline
|
|
05-14-2006, 00:11
|
#17
|
|
Quiet Professional
Join Date: Nov 2004
Location: Colorado
Posts: 754
|
"mildly complicated process" ???
Just making your own washers of different sizes. Mr Harsey, I have you state a few times out here that learning all that is available out here, can sometimes give you a headache. Or was that just the incorrigible One's posts? FS.
Anyway, read all your posts. I got a headache in, I think, 5th grade. Didn't like and said no more. Havn't had one since. But, when you and FS go technical on me, you may break that string. I must say/type this though. FS comes closer. You, explain things in everyday terms. Just impressive what you do. With her we have the frabriggio pine cone principle thang.
__________________
Brad...
|
|
12B4S is offline
|
|
05-15-2006, 09:13
|
#18
|
|
Friend of Team Sergeant
Join Date: Feb 2004
Location: Houston, Texas
Posts: 60
|
Well.. the guy who was supposed to buy everything came in Sat and decided he didnt want everything and thought better of lowballing me on everything just so he could sell it off.
So.... I will be posting a complete list of my inventory at dealer prices once I get it updated. I will accept offers for anything I have, just please dont insult me. I do need to move this stuff, but I`m not giving it away just to sell it.
A-Zone Specialty Equipment Physical inventory as of 5/15/2006
just added
EOTech 512 sight $300.00
GG&G
LH 870 sling plate x 4 @ $ 22.50
RH Mossberg sling plate x 1 @ $22.50
LH Mossberg sling plate x 1 @ $22.50
SLIC mount x 2 @ $67.50
Rear sling thing x 4 @ $27.50
PVS-14 mount x 1 @ 214.95
Sling thing front x 2 @ $22.50
T.I.D. ( Surefire E2 ) x 2 @ $ 30.00
UFIR rails x 4 @ $ 32.00
Offset light mount x 2 @ $ 56.25
U.S.P. Compact light mount rail x 3 @ $37.80
U.S.P. full size .45 light mount rail x 1 @ $37.80
LH carbine sling plate x 2 @ $20.50
RH carbine sling plate x 1 @ $20.50
Looped Carbine sling plate x 5 @ $22.50
RH fixed stock sling plate x 7 @ $28.10
LH fixed stock sling plate x 5 @ $28.10
Knight vertical foregrip tube x 1 @ $22.50
Rail Riser mount x 1 @ $55.00
Wilderness AR-15 fixed stock LH sling x 4 @ $ 27.95
Wilderness fixed stock tri-glide RH x 2 @ $ 37.00
Wilderness tri-glide car-15 x 1 @ $ 21.00
Wilderness car-15 x 4 @ $ 29.75
Blackhawk Products group:
52BS16BK pouch x 2 @ $16.22
52PMK2BK magpouch x 2 @ $18.82
70DC00BK Chalker Sling x 2 @ $38.97
43SS15BK shotgun sling x 2 @ $12.97
70DC02BK adaptors x 1 @ $6.46
70GS04BK sling x 4 @ $25.97
70GS03BK sling x 1 @ $32.47
70GS05BK (L) sling x 1 @ $25.97
70GS05BK sling x 3 @ $25.97
70GS02BK sling x 1 @ $32.47
71CQD1BK weapon catch x 2 @ $22.72
71GS01BK sling x 6 @ $32.47
70GS00BK x 1 @ $25.97
30VT23BK (L) x 1 @ $90.00
6804 pack x 1 @ $100.72
MP5 subload x 1 @ $38.97
M4 subload x 1 @ $38.97
Bugout bag x 1 @65.00
Radio pouch x 1 @ $11.67
Tango down products:
BP-4S x 3 @ $18.96 $56.88
Rail cover tan x 2 @ $9.80
PRI front sight .625 bbl x 2 @ $140.00 $280.00
Aimpoint mount spacer x 2 @ $8.00 $16.00
Knight Mfg.
M5 RAS x 2 @ $311.00
Vertical grip x 3 @ $48.00
300 meter BUIS x 2 @ $111.00
Comp M mount x 1 @ $109.00
1" light mount x 1 @ $43.00
2 rib rail cover x 1 @ $16.00
4 rib rail cover x 12 @ $16.00
6 rib rail cover x 13 @ $16.00
11 rib rail cover x 7 @ 16.00
Sling adaptor x1 @ $33.15
Nightforce scope rings x 2 @ $130.00
Badger Ordinance tac latches x 14 @ $15.64
Badger Med HT rings x 1 @ $140.00
Badger Max 50 rings with reducers x 1 @ $200.00
30mm/1" reducers x 1 @ $30.00
M700 bolt knob x 1 @ $30.00
Leupold Med HT MK IV rings x 1 @ $140.00
Nightforce M700 SA rail x 1 @ $113.00
Nightforce M700 LA rail x 1 @ $113.00
Turner Saddlery rifle slings x 2 @ $45.00
Cali competition works shotshell carriers x 6 @ $16.00 Mag cinch for M4 mags x 6 @ $14.00
ARMS mounts:
#2 x 2 @ $45.95
#20 x 1 @ $120.00
#22M68 spacer x 1 @ $7.60
Surefire lights:
Rifle length rail system x 2 @ $129.00
Medium length rail system x 1 @ $ 123.60
F05 filter x 2 @ $4.80
P90 bulb assy x 1 @ $15.00
P91 bulb assy x 2 @ $16.20
FM-15 filter x 1 @ $16.80
FM-65 filter x 1 @ $16.80
UU06 tailcap x 1 @ $ 60.00
SL-14 X200 switch x 1 @ $39.00
M38 x 1 @ $ 21.60
Streamlight:
M3 weapon light x 1
Thunder Ranch rifle kit x 2 @ $100.00
Thunder Ranch pistol kit x 3 @ $67.48
TL-3 LED x 1 @ $78.73
M3X LG x 2 @ $179.98
M3X x 1 @ $129.98
M6X x 1 @ $369.98
M6 x 1 @ $228.98
M2 x 2 @ $ 162.92
Red tip off cover x 1 @ $6.00
Long gun remote switch x 1 @ $57.48
M3 pistol mounts x 2
Stallion M3 belt pouches x 2 @ $15.00
Pentagon light:
X2 xenon HA x 1 @ $55.00
S2-19 LED x 1 @ $60.00
PX1-belt clip x 2 @ $45.00
Pelican M6 light x 1 @ $33.48
Rock River Arms 4 position stock x 3 @ $45.00
Rock River Arms entry stock x 1 @ $47.50
HK MP5 sling x 2 @ $40.00
ITC muzzle cover x 5 @ $5.00
ITC stock cover x 1 @ $15.00
Lasermax 1911 grips x 1 @ $200.00
Safariland:
6004 1911 LH x 1 @ $85.80
M16 mag pouch ( for shroud ) x 6 @18.90
6004 Glock 17/22 RH X 4 @ $85.80
6004 Sig 229 w/M3 light RH x 1 @ $91.80
6004 Sig 220/226 LH x 1 @ $85.80
6004 Sig 220/226 w/X200 RH x 1 @ $91.80
6004 Glock 17/22 LH x 2 @ $85.80
6004 RH beretta/M9 w/ Surefire P series Nitrolon light $96.60
6280 Sig 228/229 Duty RH x 1 @ $90.60
6280 Sig 220/226 w/surefire P114 BW Duty RH x 1 @ $ 96.60
Duty belt x 1 @ $30.00
Eagle Industries:
Dump pouch x 1 @ $35.38
MP5 subload x 1 @ $38.12
OD goggle cover x 1 @ $ 8.16
Evidence pouch x 1 @ $13.83
Belt pad ( small ) x 1 @ $9.29
Rifle cheekrest x 8 @ $22.02
Shotgun cheekrest x 1 @ $22.02
3 day pouches x 1 @ $13.20
Alta elbow pads x 7 @ $15.00
Vltor fixed stock x 3 @ $89.97
Ace entry stock x 3 @ $70.00
Glock 22 mags x 6 @ 14.29
HK USP compact 9mm mags x 2 @ $27.17
Brownells 20 rd AR mags x 4 @ $12.50
Bushmaster 5 rd AR mag x 1 @ $18.83
McCormick 10rd 1911 mag x 4 @ $18.17
Sig Arms P228 9mm x 5 @ 25.00
Glock 21 x 8 @ $14.29
Glock 20 x 7 @ $14.29
Glock 19 x 10 @ $14.29
Glock 23 x 3 @ $14.29 Glock 26 x 1 @ $14.29
Glock 27 x 4 @ $14.29
ISMI 1911 recoil spring x 3 @ $5.31
ISMI Glock mag spring x 8 @ $7.68
Lightning Strike guide rod x 3 @ $13.12
Lightning Strike safety plunger x 2 @ $15.00
Ergo gapper x 3 @ $2.22
Arredondo Benelli bolt release x 6 @ $15.96
Accuwedge x 6 @ $4.25
THE Glock mag release x 4 @ $22.50
More to come....
Last edited by ChandlerSniper; 05-24-2006 at 16:44.
|
|
ChandlerSniper is offline
|
|
05-15-2006, 09:15
|
#19
|
|
Quiet Professional
Join Date: Jan 2004
Location: Free Pineland
Posts: 24,832
|
Look forward to seeing the list.
TR
__________________
"It is not the critic who counts; not the man who points out how the strong man stumbles, or where the doer of deeds could have done them better. The credit belongs to the man who is actually in the arena, whose face is marred by dust and sweat and blood; who strives valiantly; who errs, who comes short again and again, because there is no effort without error and shortcoming; but who does actually strive to do the deeds; who knows great enthusiasms, the great devotions; who spends himself in a worthy cause; who at the best knows in the end the triumph of high achievement, and who at the worst, if he fails, at least fails while daring greatly, so that his place shall never be with those cold and timid souls who neither know victory nor defeat." - President Theodore Roosevelt, 1910
De Oppresso Liber 01/20/2025
|
|
The Reaper is offline
|
|
05-15-2006, 09:55
|
#20
|
|
Friend of Team Sergeant
Join Date: Feb 2004
Location: Houston, Texas
Posts: 60
|
Special Operations Equipment:
Med Tech vest x 1 @ $217.00
Force vest LH x 1 @ $200
H-Harness x 1 @ $66.15
Holster RH x 10 @ $49.00
Holster LH x 10 @ $49.00
Holster w/light x 1 @ $66.50
M4 subloads x 4 @ $47.25
Riggers belts x 9 @ $28.00
Shotshell pull out tray x 5 @ $14.00
Rifle mag pouches ( belt mount ) x 14 @ $20.00
Rifle mag pouch Molle x 1 @ $20.00
Double pistol mag horiz x 4 @ $15.00
Double pistol mag vert x 4 @ $15.00
Triple pistol mag x 5 @ $20.00
Utility pouch x 3 @ $10.00
Triple mag pouch Molle x 2 @ $20.00
Double mag pouch Molle x 2 @ $15.00
Camel bak Cover x 1 @ $20.00
M4 Slings x 1 @ $20.00
Gas mask pouch x 1 @ $75.00
Tactical Tailor MAV x 1
Tactical Tailor X harness x 1 $95.00 for all TT gear
Tactical Tailor triple mag pouch x 1
Tactical Tailor Double M4 mag pouch x 1
All TT gear is in Tan
Hatch gloves:
Operator x 12 @ $30.00
Operator cqb x 9 @ $32.00
Operator shorty x 11 @ $28.00
Nomex flight gloves x 9 @ $19.00
Damascus operator x 1 @ $19.00
ATN 5 x 33 scope x 1 @ $150.00
Ghille suit with jump bag x 1 @ $150.00
camelbak bladder x 1 @ $20.00
5.11
Pants x 10 @ $30.00
Shirts x 12 @ $25.00
Vests x 12 @ $40.00
Accessory kits x 3 @ $30.00
Commonoli reverse plug ( 1911 ) x 1 @ $38.34
Ghost Rocket Glock connector x 2 @ $18.00
Smith and Alexander ambi 1911 mag release x 2 @ $78.00
3 gun gear shotshell carrier x 1 @ $25.00
.400 Corbon 1911 6" bbl. X 1 @ $50.00
9mm Hammer and buffer plug for AR15 x1 @ $11.00
9mm mag block for AR15 x 1 @ $80.00
Butler Creek #10 eye cap x @ $8.00
Harris #5 bipod adaptor x 1 @ $8.50
DPMS quad rail gas block x 1 @ $25.00
KNS AR15 front sight x 2 @ $20.67
EGW AR15 comp x 1 @ $40.00
Kershaw Leek folder x 1 @ $35.58
Smith and Wesson folder x 1 @ $25.00
HK rifle bayonette x 1 @ $40.00
Fobus Vertical grip x 1 @ $30.00
Fobus universal mount x 1 @ $19.69
Fobus streamlight mount x 3 @ $19.69
Lula AK loader x 1 @ $18.95
Kevlar helmet w/pvs 7 mount x 1
Please email me with any questions..
Thanks,
Scott
Last edited by ChandlerSniper; 05-20-2006 at 09:09.
|
|
ChandlerSniper is offline
|
|
05-15-2006, 18:32
|
#21
|
|
Quiet Professional
Join Date: Sep 2004
Location: Ohio
Posts: 982
|
Quote:
|
Originally Posted by ChandlerSniper
I have some stuff left over from my company that the new owner didn`t get.
Heres the list:
3- new in the wrapper Knight Mfg. SR-25 20 round mags. They are $110.00 retail asking $75.00 each shipped.
2- used Glock 21 drop free hi-cap mags with Grams basepads.. asking $35.00 each.
2- 3 gun gear shotgun side saddle 2 round carriers. 1 is still in the wrapper other was used once. I want $20 for the new one, and $10.00 for the used one. ( used one is sold pending funds )
a JP close range tactical sight with a MSP hi-vis front post, and a 6" rail to mount to a round handguard. Asking $125.00 for everything.
6 pairs of Simonich Gunner grips for 1911.
The Gunners are all sold pending funds
I can take pics if anyone is interested. Please email me with any questions.
Thanks,
CS#158
|
Please tell me that I can still order through you.
I saw this thread and began to panic.
I still want to be able to drive up to Michigan and do the hand off at a fast food parking lot with you.
Curious minds would like to know.
Doc
__________________
De Oppresso Liber
|
|
Doc is offline
|
|
05-15-2006, 18:35
|
#22
|
|
Gun Pilot
Join Date: Jan 2004
Location: Iowa and New Mexico
Posts: 2,143
|
Quote:
|
Originally Posted by Doc
I still want to be able to drive up to Michigan and do the hand off at a fast food parking lot with you.
Curious minds would like to know.
Doc
|
Doc:
If you can drive up to Michigan, you could drive to Iowa.
Terry
__________________
E7-CW3-direct commission VN
B model gunship pilot 65-66 Soc Trang, Cobra Pilot 68-69-70 Can Tho Life member 101st Airborne Association
|
|
CPTAUSRET is offline
|
|
05-15-2006, 18:37
|
#23
|
|
Friend of Team Sergeant
Join Date: Feb 2004
Location: Houston, Texas
Posts: 60
|
Doc,
No worries on that...if you need anything just let me know. I`m just getting rid of my inventory so I dont have to do shows anymore, I can`t afford to sit on this stuff. My new business isnt going to allow me time time to do both.
|
|
ChandlerSniper is offline
|
|
05-15-2006, 19:32
|
#24
|
|
Quiet Professional
Join Date: Sep 2004
Location: Ohio
Posts: 982
|
Quote:
|
Originally Posted by ChandlerSniper
Doc,
No worries on that...if you need anything just let me know. I`m just getting rid of my inventory so I dont have to do shows anymore, I can`t afford to sit on this stuff. My new business isnt going to allow me time time to do both.
|
Thank you.
Doc
__________________
De Oppresso Liber
|
|
Doc is offline
|
|
05-29-2006, 09:49
|
#25
|
|
Guerrilla Chief
Join Date: Aug 2005
Location: Indiana
Posts: 695
|
Are the Cali competition works shotshell carriers 6 or 4 shell?
Do you have any of the Hatch Operator shorty gloves in XXL?
|
|
Sten is offline
|
|
05-30-2006, 06:54
|
#26
|
|
Friend of Team Sergeant
Join Date: Feb 2004
Location: Houston, Texas
Posts: 60
|
The Cali shell carriers are 4 rounders.. what color you looking for.. all the gloves are black and OD.
Thanks
|
|
ChandlerSniper is offline
|
|
05-30-2006, 07:51
|
#27
|
|
Guerrilla Chief
Join Date: Aug 2005
Location: Indiana
Posts: 695
|
Either of the listed colors would be fine.
If you have shipped the other order for me hold on to it to combine all of this. I will take 2 of the cali holders and a pair of the gloves once we figure out payment and the size.
|
|
Sten is offline
|
|
06-01-2006, 07:32
|
#28
|
|
Guerrilla Chief
Join Date: Aug 2005
Location: Indiana
Posts: 695
|
I got the USPc mags today, Thank you!
|
|
Sten is offline
|
|
|
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
|
|
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
All times are GMT -6. The time now is 23:40.
|
|
|