04-16-2005, 19:10
|
#1
|
|
Quiet Professional
Join Date: Jan 2004
Location: The Woodlands, Texas
Posts: 931
|
Glock won't lock to rear ...
Well, that's essentially the problem I'm currently having. My Glock 19 has developed an issue with locking to the rear when the last round is expended. Originally, it did this about once every 30, or so rounds. I attributed this to cheap target ammo. Over the course of the last few months it's become too common. In fact, I decided to fire the regular ammo I carry for personal defense and still the same problem.
My glock has a new trigger and an extended magazine release. These two items were inserted into the gun about a week ago. The problem has occured for far longer than that. I'm gonna experiment with firing the gun with my thumb completely clear of the slide release, just in case I'm pressing this with my current grip (just thought of that today). Other than that, what else could it be? Any experts out there have any advice. Thanks.
BAS
__________________
- Retired Special Forces Officer -
Special Forces Association Lifetime Member
|
|
Basenshukai is offline
|
|
|
04-16-2005, 19:15
|
#2
|
|
Quiet Professional
Join Date: Jan 2004
Location: Free Pineland
Posts: 24,826
|
How old is it/how many rounds do you have through it?
Also, same question on the mags.
Does it malf with all of the mags, including new ones, or just certain ones?
A high grip dragging on the slide release is another possibility.
Does it do it with other shooters?
TR
__________________
"It is not the critic who counts; not the man who points out how the strong man stumbles, or where the doer of deeds could have done them better. The credit belongs to the man who is actually in the arena, whose face is marred by dust and sweat and blood; who strives valiantly; who errs, who comes short again and again, because there is no effort without error and shortcoming; but who does actually strive to do the deeds; who knows great enthusiasms, the great devotions; who spends himself in a worthy cause; who at the best knows in the end the triumph of high achievement, and who at the worst, if he fails, at least fails while daring greatly, so that his place shall never be with those cold and timid souls who neither know victory nor defeat." - President Theodore Roosevelt, 1910
De Oppresso Liber 01/20/2025
|
|
The Reaper is offline
|
|
|
04-16-2005, 19:23
|
#3
|
|
Quiet Professional
Join Date: Jan 2004
Location: LA
Posts: 1,653
|
What Reaper said. When I have had that problem, it has been the mags.
__________________
Somewhere a True Believer is training to kill you. He is training with minimal food or water, in austere conditions, training day and night. The only thing clean on him is his weapon and he made his web gear. He doesn't worry about what workout to do - his ruck weighs what it weighs, his runs end when the enemy stops chasing him. This True Believer is not concerned about 'how hard it is;' he knows either he wins or dies. He doesn't go home at 17:00, he is home.
He knows only The Cause.
Still want to quit?
|
|
NousDefionsDoc is offline
|
|
|
04-16-2005, 22:45
|
#4
|
|
Guerrilla
Join Date: Feb 2004
Location: Texas
Posts: 152
|
what they said.
Check the mags - it does this on all mags? how old are they and what kind of followers do they have installed? how many mags do you have? If you only have 2 mags and it used to do it every once in a while... well, maybe the second mag follower finally wore down.  Check the slide stop for wear - they are like $20, how old is the glock?
does it fail to lock back when you insert an empty mag and manually rack the slide? or only when you are shooting?
who did the trigger and mag drop swap out? It is easy to re-assemble the 3 pin clocks and put the 2 forward pins in wrong... but that usually results in the opposite - a bolt action glock.
__________________
---
.45 GAP: the .41 magnum of the new millennium!
|
|
GackMan is offline
|
|
|
04-16-2005, 23:55
|
#5
|
|
Guerrilla
Join Date: Jul 2004
Location: Oregon
Posts: 158
|
Its highly possible that the spring on the slide-lock could have gotten broken.
If you have a 3-pin lower, i.e. locking block pin, trigger pin, trigger housing pin, the locking block pin has to be inserted first before inserting the trigger pin and slide-lock or it will break the spring.
If that is not the case, you might need new mag springs. Remove the baseplate from the mag, and you should have at least two coils sticking out of the mag if you invert it.
__________________
13R2P Ft. Bragg, NC 1984-1988
|
|
bberkley is offline
|
|
|
04-17-2005, 09:55
|
#6
|
|
Quiet Professional
Join Date: Jan 2004
Location: Phoenix, AZ
Posts: 20,929
|
Throw it away and get a real gun. 
|
|
Team Sergeant is offline
|
|
|
06-28-2005, 09:20
|
#7
|
|
Asset
Join Date: Jun 2005
Location: Cebolla, NM
Posts: 11
|
If you send it back to Glock, they will fix it free. Phone number for an RMA is in the
paperwork or can be found online. That being said, it sounds like a worn
slide release to me. If you do not/cannot send it back to Glock for
repair, replace this part (or have a local Glocksmith do it). If all
else fails, I will fix it for you.
Regards,
whit
|
|
whit is offline
|
|
|
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
|
|
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
All times are GMT -6. The time now is 16:47.
|
|
|
Hybrid Mode
