11-16-2010, 15:37
|
#1
|
|
Area Commander
Join Date: Aug 2004
Location: Texas
Posts: 1,355
|
Bent firing pin
I just returned from a week down in Nacogdoches with Paul Howe for CSAT's Tactical Rifle Instructor course (which I highly recommend). I took two rifles down - a 10.5" LWRC M6A2 and a 14.5" Noveske N4 Light. After the first day, I switched to the Noveske because the other instructors were complaining about the muzzle blast from my SBR, which has a PWS FSC muzzle device.
The photos below are of the firing pin from my Noveske after a day of moderate shooting (approx. 400 rds). I experienced no major failures with the weapon and it was both clean and well-lubricated, although the trigger did seem to "stick" or fail to reset several times during rapid fire sequences (2-3 rds per second).
While cleaning the weapon at the end of the day, I was surprised to see that the firing pin was both bent and the head mushroomed. I showed Paul and, after the expected ribbing about fancy rifles, he admitted that he had not seen many firing pins like this come out of functioning weapons. Lucky for me, he had a replacement on hand.
Any ideas on what might have caused this? I inspected the bolt and saw no obvious signs of damage and the weapon seems to be running fine with the new firing pin. Are there any other things I should check for damage?
Thanks guys.
__________________
"Whatsoever thy hand findeth to do, do it with thy might; for there is no work, nor device, nor knowledge, nor wisdom, in the grave whither Thou goest." - Ecclesiastes 9:10
"If simple folk are free from care and fear, simple they will be, and we must be secret to keep them so." - JRRT
|
|
jatx is offline
|
|
|
11-16-2010, 16:08
|
#2
|
|
Guerrilla Chief
Join Date: Sep 2005
Location: DFW area
Posts: 861
|
Have you looked at the bolt around the firing pin hole under magnification?
Any obstructions? 
__________________
"The difference is that back then, we had the intestinal fortitude to do what we needed to in order to preserve our territorial sovereignty and to protect the citizens of this great country, and today, we do not." TR
"I attribute the little I know to my not having been ashamed to ask for information, and to my rule of conversing with all descriptions of men on those topics that form their own peculiar professions and pursuits." John Locke
|
|
dr. mabuse is offline
|
|
|
11-16-2010, 17:35
|
#3
|
|
Quiet Professional
Join Date: Jun 2004
Location: Occupied Pineland
Posts: 4,701
|
Get a machinist to check the hardness of your firing pin. It looks like somebody skipped the heat treat.
__________________
A nation can survive its fools, and even the ambitious. But it cannot survive treason from within. An enemy at the gates is less formidable, for he is known and carries his banner openly. But the traitor moves amongst those within the gate freely, his sly whispers rustling through all the alleys, heard in the very halls of government itself. For the traitor appears not a traitor; he speaks in accents familiar to his victims, and he wears their face and their arguments, he appeals to the baseness that lies deep in the hearts of all men. He rots the soul of a nation, he works secretly and unknown in the night to undermine the pillars of the city, he infects the body politic so that it can no longer resist. A murderer is less to fear.
~ Marcus Tullius Cicero (42B.C)
|
|
Peregrino is offline
|
|
|
11-16-2010, 17:38
|
#4
|
|
Quiet Professional
Join Date: Jan 2004
Location: Free Pineland
Posts: 24,804
|
I agree.
The only thing that touches the head of the firing pin is the hammer, which should be softer than the firing pin.
The only ones I have seen bent were from prying or hammering.
TR
__________________
"It is not the critic who counts; not the man who points out how the strong man stumbles, or where the doer of deeds could have done them better. The credit belongs to the man who is actually in the arena, whose face is marred by dust and sweat and blood; who strives valiantly; who errs, who comes short again and again, because there is no effort without error and shortcoming; but who does actually strive to do the deeds; who knows great enthusiasms, the great devotions; who spends himself in a worthy cause; who at the best knows in the end the triumph of high achievement, and who at the worst, if he fails, at least fails while daring greatly, so that his place shall never be with those cold and timid souls who neither know victory nor defeat." - President Theodore Roosevelt, 1910
De Oppresso Liber 01/20/2025
|
|
The Reaper is offline
|
|
|
11-16-2010, 18:38
|
#5
|
|
Area Commander
Join Date: Feb 2009
Location: Clay House Stuttgart, Germany
Posts: 2,661
|
My first thought was that you somehow got a non milspec cheap import for a part.
I'd check all of the other parts too and then contact the manufacturer.
|
|
mojaveman is offline
|
|
|
11-16-2010, 19:13
|
#6
|
|
Area Commander
Join Date: Aug 2004
Location: Texas
Posts: 1,355
|
Thanks, gentlemen. I'll contact Noveske and see what they have to say. They are usually great to deal with, so I'm sure they'll make it right.
__________________
"Whatsoever thy hand findeth to do, do it with thy might; for there is no work, nor device, nor knowledge, nor wisdom, in the grave whither Thou goest." - Ecclesiastes 9:10
"If simple folk are free from care and fear, simple they will be, and we must be secret to keep them so." - JRRT
|
|
jatx is offline
|
|
|
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
|
|
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
All times are GMT -6. The time now is 06:07.
|
|
|
Hybrid Mode
