[frostfire]

Originally Posted by Peregrino

Not sure how helpful the gunsmith info will be; he isn't local. If you're willing to do a two hour drive from FBNC, send a PM and I'll provide contact info. Also not sure about your suppressor attachment decision. I'm unaware of any AKs with 5/8-24 muzzle threads (I am open to being educated though!). FWIW - SF isn't the only game in town (it's just the one I prefer at the moment). I would recommend checking out some of the others and perhaps contacting them to see if they make muzzle attachment devices for the .308 ARs and AKs, then purchase the appropriate adapters for the respective rifles. You will be much happier with a fast attach muzzle device that does extra duty as a FH/MB and thread protector; especially if you're planning to use one can on multiple weapons. The extra dollars will be well spent. Course that's MOO, YMMV.

Peregrino Sir,

you are correct. Use adapter to fit same can to .308 and 7.62x39 i.e. http://www.usmachinegun.com/proddeta...prod=M92-TA308
I have seen a suppressed standard AK74 that way. Quite sweet set up. Of course, barrel concentricity better be squared away or baffle strike most likely will occur and bye-bye to $$$$ can and its warranty. Also referring to the 10" M92 barrel on that page, the 7.62x39 retains better MV than 5.56 out of < 16" barrel. Plenty tests done with ~150-210fps lost MV. I suspect the can will help reduce that MV discrepancy further.

I'll take the SF brake to John at Shooter Supply. He's always been solid, even took me to the back and taught me finer points of gunsmithing and becoming a better armorer.