Professional Soldiers ® - View Single Post - Knife Storage

**Ambush Master** · 11-04-2012, 11:06

Mine live either in my pocket or in the "Gun Safe". The Safe has a "Goldenrod" de-humidifier/electrical heater that keeps the temp at a constant stable level, until you open the door and as long as it is warmer than OAT, you're good.

I would also recommend one of the LPS Products over any other oil/mineral oil etc. LPS#2 is a light lube and LPS3 is somewhere between motor oil and causmoline. It dries to a somewhat tacky consistency. They are both rated to a "Fingerprint Neutralizing" specification!! When we were Overhauling PT6s it was the only readily available product that worked!! FORGET WD40, all it's really good for is to be used as a Starting Fluid!! I've seen the insides of many "Alloy" framed weapons growing "Flower Garden Corrosion" that had been maintained with it!! I'll never trust anything that I own to anything but LPS!!!

http://www.lpslabs.com/product_pg/lu...s_pg/LPS2.html

I was first introduced to this product somewhere around 1972/3 and it was a PHENOMINAL demonstration. It was @ Houston Hobby Airport in a hangar. When we arrived there was a table, with a rather large aquarium on it that was filled with water, a 55 gal drum also filled with water. The LPS SME walked over to the table carrying a cheap electric drill, a white ceramic light bulb socket/w bulb, an ungrounded extension cord and a can of LPS2!! He then, after a few words took the bulb out of the socket and sprayed it's base and the socket with the LPS2. He then plugged it in and submerged the socket and bulb in the aquarium and proceeded to screw the bulb into the socket until it LIT UP!! He then unscrewed it and repeated, this guy WAS NOT SUPERMAN, it was the LPS!!! He then sprayed down the cheap drill, and proceeded to drill holes in the drum full of water from the inside out!!!

Good stuff and I've used it ever since. The only thing I'll do with a can of wd40 is shoot it!!

Later
Martin

11-04-2012, 11:06	#8
Ambush Master Quiet Professional Join Date: Jan 2004 Location: DFW Texas Area Posts: 4,741	Mine live either in my pocket or in the "Gun Safe". The Safe has a "Goldenrod" de-humidifier/electrical heater that keeps the temp at a constant stable level, until you open the door and as long as it is warmer than OAT, you're good. I would also recommend one of the LPS Products over any other oil/mineral oil etc. LPS#2 is a light lube and LPS3 is somewhere between motor oil and causmoline. It dries to a somewhat tacky consistency. They are both rated to a "Fingerprint Neutralizing" specification!! When we were Overhauling PT6s it was the only readily available product that worked!! FORGET WD40, all it's really good for is to be used as a Starting Fluid!! I've seen the insides of many "Alloy" framed weapons growing "Flower Garden Corrosion" that had been maintained with it!! I'll never trust anything that I own to anything but LPS!!! http://www.lpslabs.com/product_pg/lu...s_pg/LPS2.html I was first introduced to this product somewhere around 1972/3 and it was a PHENOMINAL demonstration. It was @ Houston Hobby Airport in a hangar. When we arrived there was a table, with a rather large aquarium on it that was filled with water, a 55 gal drum also filled with water. The LPS SME walked over to the table carrying a cheap electric drill, a white ceramic light bulb socket/w bulb, an ungrounded extension cord and a can of LPS2!! He then, after a few words took the bulb out of the socket and sprayed it's base and the socket with the LPS2. He then plugged it in and submerged the socket and bulb in the aquarium and proceeded to screw the bulb into the socket until it LIT UP!! He then unscrewed it and repeated, this guy WAS NOT SUPERMAN, it was the LPS!!! He then sprayed down the cheap drill, and proceeded to drill holes in the drum full of water from the inside out!!! Good stuff and I've used it ever since. The only thing I'll do with a can of wd40 is shoot it!! Later Martin __________________ Martin sends.
Ambush Master is offline