It appears that when I installed the hammer spring I placed it backwards. The "legs" from the hammer spring came over the top. This allowed the trigger system to function correctly but it did cause several FTFs. Apparently this also wasn't keeping enough tension on the trigger pin to keep it from walking.
I removed the hammer flipped the spring and while I havn't made it to the range with it yet the pin now is locked up tight when the hammer is cocked. There is now only minimal movement when the hammer is decocked.
Thank you for all of the help. I'll report back if this still does not solve the problem but I anticipate that it is resolved.
Who'da thought it was something I did wrong
