[ChandlerSniper]

If all you want to do is remove the buttstock, you only need a flat blade screwdriver. Look on the butt and the screw on the top is the one you need to take out to get the stock off the buffer tube. When you slide it off... make sure you don`t lose the detent spring for the takedown pin, you`ll see it as you start sliding the stock off. It`s very simple to do.

To change it over to a collapsable stock you will need to change a few parts. You will need a carbine buffer tube and stock, a carbine buffer and spring, a carbine reciever end plate, and a castle nut. You can tighten the castle nut with a drift and mallet.. but it works alot better if you have the correct wrench. There are several companies that sell whole kits to change over to a collapsable stock from a fixed, it all depends on what flavor of stock you wanna go with. If you have any kind of mechanical skills you can swap em out very easy.

If you have any questions.. just ask away or shoot me a PM.

CS