Professional Soldiers ®

Professional Soldiers ® (http://www.professionalsoldiers.com/forums/index.php)
-   Ammo Talk (http://www.professionalsoldiers.com/forums/forumdisplay.php?f=51)
-   -   Army to consider hollow point bullets for new pistol (http://www.professionalsoldiers.com/forums/showthread.php?t=49142)

Pete 07-09-2015 14:33

Army to consider hollow point bullets for new pistol
 
Army to consider hollow point bullets for new pistol

http://www.armytimes.com/story/milit...oint/29886907/

"The Army is considering the use of expanding and fragmenting ammunition, such as hollow point bullets, to increase its next-generation handgun's ability to stop an enemy.

This bit of news was revealed Tuesday, during the service's fourth industry day for its Modular Handgun System...."

&

"..."There's a myth that [expanding/fragmenting bullets] are prohibited in international armed conflict, but that doesn't make any sense now," Jackson said...."

Hmmmm

JJ_BPK 07-09-2015 17:12

Did the FBI CIA Forest Rangers and/or Marine Patrol start using HP ammo?? Homeland Security baught a bunch, but I never heard what they purchased..

I know the local LEO's here in Brevard us HP's.

HP's are great when the perp has a t-shirt, but start adding field gear, soft & hard armor,, I think not so good..


:munchin

Toaster 07-14-2015 17:18

Sounds good.

I know that Military Police on post already use them.

This hints to me that the next sidearm will continue to be a .45 set to stun (cross thread points/ref to 9mm)

My understanding is that most HPs when hitting a bunch of clothing will get blocked up and perform as a ball round. Hence, Hornady's Critical Duty has a polymer hollow point filler.

As far as armor goes, hollow point or ball it doesn't/shouldn't make a difference. I shot some soft armor HP & Ball, both were stopped. (9mm and .45)

Bleed Green 07-15-2015 14:28

Quote:

Originally Posted by JJ_BPK (Post 587354)
Did the FBI CIA Forest Rangers and/or Marine Patrol start using HP ammo?? Homeland Security baught a bunch, but I never heard what they purchased..

I know the local LEO's here in Brevard us HP's.

HP's are great when the perp has a t-shirt, but start adding field gear, soft & hard armor,, I think not so good..


:munchin

What DHS bought was 180 gr JHP in 40 S&W. A little bit better than the 155 stuff they bought before their current contract.

My question is, didn't the Hague Convention outlaw the use of bullets designed to expand within the body such as JHP?

JJ_BPK 07-15-2015 15:18

Quote:

Originally Posted by Bleed Green (Post 587861)

My question is, didn't the Hague Convention outlaw the use of bullets designed to expand within the body such as JHP?

The US didn't sign the document..

The Reaper 07-15-2015 15:57

We generally abide by the conventions, even though we are not signatories.

My understanding is that unless your opponent wears an identifiable uniform, has a clearly established chain of command, and follows the conventions themselves, we are not obligated to honor them either.

TR

Bleed Green 07-15-2015 17:31

Thank you both for teaching me something I didn't know. I had always operated under the assumption that we had signed off on it since I never saw any military HP rounds.

CloseDanger 07-16-2015 00:50

Just remember to load a round of Ball ammo to fire first in case you need to shoot out a window.

Joker 07-16-2015 03:15

Quote:

Originally Posted by CloseDanger (Post 587885)
Just remember to load a round of Ball ammo to fire first in case you need to shoot out a window.

Total BS.

JimP 07-16-2015 06:03

I read as far as dick jackson. He's not the brightest bulb in the circuit. He is probably getting beat about the head and shoulders already for his statement.

No way the cage gets rattled - internationally - to have us start using hp in international armed conflict. Example: iz was iac; afg was not. However, we didn't use hp in afg for a number of reasons. Dick doesn't understand a lot of this stuff and the country's expert (hays parks) has been retired for a few years now. When hays retired, they failed to fill his slot at dod ogc. So, shit like this pops up on occasion. I don't see it going anywhere.

Toaster 07-16-2015 08:22

JimP,

Thank you for the insight there, it caused me to do a little digging. I will remember Dick for future reference. Like everything there's more to this than meets the eye.

Something that was interesting was Hays Parks powerpoint on why OTM ammo is not considered a HP. (link below)

http://dtic.mil/ndia/2012armaments/Parks.pdf

JimP 07-16-2015 19:28

Yup, brilliant piece of work. The open tip was for more accuracy, NOT increasing terminal ballistics. Dick doesn't understand this and in many cases i am personally aware of, he has done the typical lawyer thing and said "no", for something he neither understands, nor takes the time to educate himself about.

hays also wrote a brilliat piiece about SOF and non-standard uniforms. It should be required reading for all SF. It gives us incredible leeway in oarticluar Situations.
hays also wrote THE DoD Law of War manual just before he retired, but Chuck Allen brought in some Snot nosed Harvard kid who "disagreed" with Hays' work and changed a lot of his material. It was just re-released and is a mere shell
of the draft i read a few years ago. hays refuses to comment upon nor be a part of the new material. Sadly, his expertise is being totally sidelined by the current perfumed princes.

Bleed Green 07-17-2015 18:08

I forgot to mention JJ that I have no idea what the new training ammunition is other than it is purple casings and bullets and they will function similarly to the 40 cal and 5.56 rounds we currently use for duty. I am still thinking that training with rounds you don't count on when seconds count is a stupid idea, but then again I remember bitching about 38 wad cutters when I was carrying 357 mag rounds everywhere but at the range. Some lessons that we had to learn in blood are evidently easily forgotten by todays kids that know far more than I have ever learned.

Toaster 07-17-2015 22:18

I can see a logic in training with .38 wadcutters for a .357, not that I entirely agree with it, since IMO it's a lazy and dangerous method. Many police officers do not train daily with their own with their sidearm, and aren't great shots...

A mildly loaded .38 wadcutter is going to have less recoil than a full power .357. A good number of people are recoil sensitive, and if they were to shoot full power loads they would train in a flinch and be less than effective marksman. Having them shoot a softer shooting round helps to eliminate the flinch. Putting in the full power load for duty gives them the desired performance, and the thought is that their adrenaline will be pumping and they won't notice the recoil.

Needless to say this is not something that someone who is serious about marksmanship should do, but maybe a wife/girlfriend who wants a small gun for self defense, but will not spend time training to get better. I don't see these shooters being able to do follow up shots well either.

I can put the 90gr .38 HPs for women by hornady in my J-frame and there is no recoil worth mentioning, using a full powered .357 has more felt recoil than my full sized .45.

Just my $0.02, I'm more than willing to hear experienced opinions on the subject.

Team Sergeant 07-18-2015 11:07

Quote:

Originally Posted by CloseDanger (Post 587885)
Just remember to load a round of Ball ammo to fire first in case you need to shoot out a window.

Quote:

Originally Posted by Joker (Post 587887)
Total BS.

I agree. Stick with one ammo, HP's with take out a window just fine and if aimed right will finish the job as well.

Bleed Green 07-18-2015 18:31

Quote:

Originally Posted by Team Sergeant (Post 588175)
HP's with take out a window just fine and if aimed right will finish the job as well.

I have never seen a round not take out the side window glass, but I must confess that I have seen a few people bleeding from the head for taking a baton or a mag light that bounced off the glass and came right back at them. Who knew those pesky windows would do that? :D

7624U 05-21-2025 06:38

Quote:

Originally Posted by FrankWeike (Post 680999)
Coulda swore someone did a bunch of body work on a honda around here and did a nice little set of pictures to show what all he did. But i cant find it.

Would it be worth it to do a little write up on my process of body work? More than what i just document and post in my progress log anyway.



click the following link and post a introduction before posting anything else.

https://www.professionalsoldiers.com...36757&page=179

milkman 05-22-2025 05:58

Just some info on the HPT in the Sig family of Pistols.
I have had several Sig's, P320, P365XL, P365 Macro, P322. while all of them fed well with the FMJ and HPT , the emphasis is the feed tay on the HPT. Because the angle of the feed tray on a flat nose bullet is critical to feeding the bullet into the chamber.
I had no malfunctions after firing both types of ammo with all of these Sig's.
The Sig P322 seems to get lead build up with lead bullets instead of copper or other types of bullets. I switched over to CCI 22 Magnum and had no malfunctions.
I have shot hundreds of rounds through all of these pistols, shooting a fast cycle or slow. Allowing the barrel to heat up and the chamber with no malfunctions.
I think both round are accurate, and the HPT has more stopping power, which is needed in many situations that you might get into.
The difference in HPT's is what type, because there is quite a variety of HPT's on the market today.


All times are GMT -6. The time now is 04:10.


Copyright 2004-2022 by Professional Soldiers ®