11-02-2009, 21:18
|
#1
|
|
Quiet Professional
Join Date: Sep 2008
Location: Ohio
Posts: 286
|
Rat grips for pistols, knives, etc
Iv been playing with this stuff on my guns and knives. I like it ALOT! Easy to work with and you can mold it in any shape you like. Im going to attach a couple pics of the grips on guns but you can do anything with it.
I ran a full mag through my Para without the grip then a full mag through a buddies Para with the grip on, cut my double tap tiem damn near in half. Alot more comfortable and controlable
The web site is
www.ratgrips.com
not really any info on there yet but there is a contact number.
figured I better put a little more info
All you need is a heat gun to put this stuff on. once its warm it molds like silly putty. You can get it as thin or thick as you need even layer it up. If you put it on and dont like it, you can just pull it off and it doesnt leave any residue, at least on metal and plastic, I havent tried it on wood yet.
If you have anyquestions let me know
Last edited by JoeyB; 11-25-2009 at 10:28.
|
|
JoeyB is offline
|
|
|
11-03-2009, 01:19
|
#2
|
|
Quiet Professional
Join Date: Jan 2006
Location: N.E.WA
Posts: 1,137
|
You weren't lying about that site were you Joe??
So you like it huh?
How much does it cost, and how much do you get??
__________________
"Most of us here can attest that we never took the easy way. Easy just is............easy. Life is a work in progress, and most of the time its a struggle." ~ Me
"Every normal man must be tempted at times to spit upon his hands, hoist the black flag, and begin slitting throats." -Henry Louis Mencken (1880-1956)
"A Government that is losing to an insurgency is not being outfought, it is being out governed." Bernard B. Fall
|
|
LongWire is offline
|
|
|
11-03-2009, 06:07
|
#3
|
|
Quiet Professional
Join Date: Sep 2008
Location: Ohio
Posts: 286
|
yeah I like it and yeah there is not alot on the site 
Ill post more info and pictures when I have time. scotty pm me an address Ill send you some
|
|
JoeyB is offline
|
|
|
11-03-2009, 06:14
|
#4
|
|
Quiet Professional
Join Date: Jan 2006
Location: N.E.WA
Posts: 1,137
|
Done....Thanks Brother.
Oh yea, don't be sending anything that the DEA/ATF or Post Marshall General are gonna get me in trouble for!!!! 
__________________
"Most of us here can attest that we never took the easy way. Easy just is............easy. Life is a work in progress, and most of the time its a struggle." ~ Me
"Every normal man must be tempted at times to spit upon his hands, hoist the black flag, and begin slitting throats." -Henry Louis Mencken (1880-1956)
"A Government that is losing to an insurgency is not being outfought, it is being out governed." Bernard B. Fall
|
|
LongWire is offline
|
|
|
11-03-2009, 08:17
|
#5
|
|
Quiet Professional
Join Date: Sep 2008
Location: Ohio
Posts: 286
|
On its way and Cyn taped a note to the box saying dont f@#$ with this or scotty will blow you up.
Once you get it, give me a call (if your back in country) ill explain how to use it
|
|
JoeyB is offline
|
|
|
11-03-2009, 08:27
|
#6
|
|
Quiet Professional
Join Date: Jan 2006
Location: N.E.WA
Posts: 1,137
|
Nice........I'll let you know..........
__________________
"Most of us here can attest that we never took the easy way. Easy just is............easy. Life is a work in progress, and most of the time its a struggle." ~ Me
"Every normal man must be tempted at times to spit upon his hands, hoist the black flag, and begin slitting throats." -Henry Louis Mencken (1880-1956)
"A Government that is losing to an insurgency is not being outfought, it is being out governed." Bernard B. Fall
|
|
LongWire is offline
|
|
|
11-03-2009, 08:42
|
#7
|
|
Quiet Professional
Join Date: Jan 2004
Location: Fayetteville NC
Posts: 3,533
|
Is this your product? If so then I just sent you an email asking for more info.
__________________
Hold Hard guys
Rick B.
Knowledge is knowing a tomato is a fruit.
Wisdom is knowing it is great on a hamburger but not so great sticking one up your ass.
Author - Richard.
Experience is what you get right after you need it.
Author unknown.
|
|
longrange1947 is offline
|
|
|
11-03-2009, 08:46
|
#8
|
|
Quiet Professional
Join Date: Jan 2006
Location: N.E.WA
Posts: 1,137
|
Quote:
Originally Posted by longrange1947
Is this your product? If so then I just sent you an email asking for more info. |
No Rick, Joey is a FED........ 
__________________
"Most of us here can attest that we never took the easy way. Easy just is............easy. Life is a work in progress, and most of the time its a struggle." ~ Me
"Every normal man must be tempted at times to spit upon his hands, hoist the black flag, and begin slitting throats." -Henry Louis Mencken (1880-1956)
"A Government that is losing to an insurgency is not being outfought, it is being out governed." Bernard B. Fall
|
|
LongWire is offline
|
|
|
11-03-2009, 09:10
|
#9
|
|
Quiet Professional
Join Date: Sep 2008
Location: Ohio
Posts: 286
|
Scotty you narc!
Rick
Its not my product, a friend from Urban Advantage is the rep for them.
Originally made for construction tools they realized its use on the "tactical" side so they redid the composition so it would last in hotter climates, resist chemicals etc..
They just started pushing this stuff, not sure how available it is but I have a box.. 
You need a heat gun, a plastic cutting board, water, texture material and the Rat grip:
1. Cut the amount of material needed
2. Place it on a wet cutting board and heat the facing side till "glossy"
3. Wet hands (always have wet hands when handling the hot material), without touching the "glossy" side place it where you want it, i.e. front strap of pistol, knife handle,etc...
4. Heat and mold into the spot you want it and make it a "blank" shape.
5. Heat material, wet hands, grab gun grip to get your finger grooves set, reheat, place wet texturing cloth over grip, grab again.
6. Make it look pretty with heat, fingers and knife if needed.
Thats about it for working with this stuff, takes minimul practice to get good at it.
Thats a fast generic talk through. this stuff can be used for anything. At CSAT they made a beaver tail for a Glock that worked very well from what I was told
Last edited by JoeyB; 11-03-2009 at 09:28.
|
|
JoeyB is offline
|
|
|
11-03-2009, 12:23
|
#10
|
|
Quiet Professional
Join Date: Jan 2004
Location: Fayetteville NC
Posts: 3,533
|
Joey, don't care what Longwire says, you're a good Fed.
Thanks for the info.
__________________
Hold Hard guys
Rick B.
Knowledge is knowing a tomato is a fruit.
Wisdom is knowing it is great on a hamburger but not so great sticking one up your ass.
Author - Richard.
Experience is what you get right after you need it.
Author unknown.
|
|
longrange1947 is offline
|
|
|
11-03-2009, 13:55
|
#11
|
|
Quiet Professional
Join Date: Sep 2008
Location: Ohio
Posts: 286
|
I dont know about there being any GOOD feds, besides, Longwire knows me too well to lie 
|
|
JoeyB is offline
|
|
|
11-25-2009, 10:29
|
#12
|
|
Quiet Professional
Join Date: Sep 2008
Location: Ohio
Posts: 286
|
website for this is
www.ratgrips.com
|
|
JoeyB is offline
|
|
|
11-25-2009, 10:55
|
#13
|
|
Quiet Professional
Join Date: Jan 2006
Location: N.E.WA
Posts: 1,137
|
Nice Testimonial....... 
__________________
"Most of us here can attest that we never took the easy way. Easy just is............easy. Life is a work in progress, and most of the time its a struggle." ~ Me
"Every normal man must be tempted at times to spit upon his hands, hoist the black flag, and begin slitting throats." -Henry Louis Mencken (1880-1956)
"A Government that is losing to an insurgency is not being outfought, it is being out governed." Bernard B. Fall
|
|
LongWire is offline
|
|
|
11-25-2009, 12:33
|
#14
|
|
Quiet Professional
Join Date: Sep 2008
Location: Ohio
Posts: 286
|
yeah yeah bite me
|
|
JoeyB is offline
|
|
|
01-25-2010, 22:54
|
#15
|
|
Quiet Professional
Join Date: Jun 2004
Location: Occupied Pineland
Posts: 4,701
|
Saw the product demo'ed at SHOT, got one of the SPRR Grip give-aways. It's also available partially pre-formed for firearm grips. I'll be experimenting on something (probably an M16A1 grip I haven't changed out yet) shortly. Interesting product with a lot of possibilities. Do your own work unless you trust somebody else's ability to judge heat (here LT, let me warm that up a bit! ).
__________________
A nation can survive its fools, and even the ambitious. But it cannot survive treason from within. An enemy at the gates is less formidable, for he is known and carries his banner openly. But the traitor moves amongst those within the gate freely, his sly whispers rustling through all the alleys, heard in the very halls of government itself. For the traitor appears not a traitor; he speaks in accents familiar to his victims, and he wears their face and their arguments, he appeals to the baseness that lies deep in the hearts of all men. He rots the soul of a nation, he works secretly and unknown in the night to undermine the pillars of the city, he infects the body politic so that it can no longer resist. A murderer is less to fear.
~ Marcus Tullius Cicero (42B.C)
|
|
Peregrino is offline
|
|
|
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
|
|
|
| Thread Tools |
|
|
| Display Modes |
 Linear Mode
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
All times are GMT -6. The time now is 10:20.
|
|
|
