Go Back   Professional Soldiers ® > Special Forces > Base Camp

Reply
 
Thread Tools Display Modes

hard armor plate
Old 11-08-2018, 02:45   #1
JeanBee
Asset
 
JeanBee is offline
Join Date: Aug 2018
Posts: 2
hard armor plate

Nowadays, bulletproof vests have been popularized in military, and can often be seen in movies, news, and books, so we are by no means unfamiliar to them. However, when it comes to hard armor plates, maybe most of us feel completely in the dark. Now, let’s talk something about hard armor plates, and before that, you should know what a hard armor plate is used for.
Most of the bulletproof vests are made of multi-layer aramid or polyethylene, with a relative light weight. However, it is not possible with available materials and processes to create a level III vest currently, meaning it is not rated to stop 9 mm FMJ and .44 MAGNUM JHP. Therefore, hard armor plates must be involved to resist bigger threats.
Hard armor plates are usually used in conjunction with bulletproof vests, and can be divided into two types, front plates, which protect the chest and back of human bodies and side plates, which protect the side of human bodies. There are mainly three kinds of materials used to make hard armor plates, steel, polyethylene, and ceramic.
Nowadays, ceramic plates have occupied a dominant position in the market. Let’s talk about the protecting mechanism and differences between various ceramic plates.
Ceramic plates are usually made of ceramic and PE. In a collision, bullets hit the ceramic layer firstly, and at the moment of contact, the ceramic layer cracks, dissipating the kinetic energy to the periphery of the impact point. And then, the PE layer is stretched and envelops warheads and shrapnel, during which the energy of bullets is consumed. In this process, there is not any impact on human body.
There are three kinds of ceramic compounds used to make ceramic plates.
1. Alumina ceramic
Alumina ceramic has the highest density but the lowest*price among the three materials. So, it is a good choice for a large-scale purchase.
2. Silicon carbide ceramic (SiC ceramic)
SiC ceramic is a relatively light material with a density much less than alumina, while slightly higher than polyethylene PE. A plate made of SiC ceramic is more comfortable to wear because of its lighter weight, but around 4-5 times costlier than alumina ceramic. Therefore, it may be an appropriate choice for wealthy clients.
3. Boron carbide ceramic
Boron carbide ceramic is very expensive with a price 8-10 time as high as SiC and a density slightly smaller than SiC. Generally, due to its high cost, it is only used to make hard armor plates with a protection level of NIJ IV. Even so, there are occasions when rich customers choose this kind of plates.
Both alumina and SiC plates can be found on the official website of Newtech.
There are mainly two finishes of hard armor plates, polyurea finish and water-proof cloth:
The water-proof cloth is a layer of water-proof polyester fabric, covering the surface of a hard armor plate. It has a simple production process and lower price.
The polyurea finish is manufactured by praying the polyurea evenly on the surface of hard armor plates. A polyurea finish is about 200g heavier than a water-proof polyester fabric finish, but it can provide a certain degree of protection for human body, and the bullet hole in the polyurea finish after gun attack is also smaller than that in the water-proof polyester fabric finish. The polyurea finish is also more expensive than the water-proof polyester fabric finish.
Now do you know what a hard armor plate is? If you still have any questions, please contact us.
Newtech has been focusing on the research and development of bulletproof products for 11 years, and offers a full line of military hard armor plates with protection levels of NIJ IIIA, III, and IV. When considering the purchase of hard armor plates, you can visit our website to find the best one for yourself.
http://www.newtecharmor.com/
  Reply With Quote

Old 11-08-2018, 05:23   #2
Combat Diver
Quiet Professional
 
Combat Diver's Avatar
 
Combat Diver is offline
Join Date: May 2010
Location: NC/Astan
Posts: 333
Thanks for the brief.

CD
  Reply With Quote

Old 11-08-2018, 06:32   #3
miclo18d
Quiet Professional
 
miclo18d's Avatar
 
miclo18d is offline
Join Date: Mar 2012
Location: Tampa, FL
Posts: 1,469
I got 2 words for you.....

Carriage return.
__________________
"The rifle itself has no moral stature, since it has no will of its own. Naturally, it may be used by evil men for evil purposes, but there are more good men than evil, and while the latter cannot be persuaded to the path of righteousness by propaganda, they can certainly be corrected by good men with rifles." — Jeff Cooper
  Reply With Quote

Old 11-08-2018, 18:37   #4
Astronomy
Quiet Professional
 
Astronomy is offline
Join Date: Feb 2012
Posts: 379
Nice advertisement.

I predict a short run on this forum...
  Reply With Quote

HARD ARMOR Plates ??? Advertisement....
Old 11-08-2018, 20:24   #5
tom kelly
Quiet Professional
 
tom kelly's Avatar
 
tom kelly is offline
Join Date: Aug 2007
Location: Philadelphia,Pa.
Posts: 730
HARD ARMOR Plates ??? Advertisement....

Good Luck....Probably won't be hearing from you again.....tom kelly
__________________
EVERYBODY WANTS TO GO TO HEAVEN: BUT, NOBODY WANTS TO DIE.
  Reply With Quote
Reply


Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump



All times are GMT -6. The time now is 05:52.



Copyright 2004-2018 by Professional Soldiers ®
Site Designed, Maintained, & Hosted by Hilliker Technologies