06-04-2017, 14:52
|
#1
|
Auxiliary
Join Date: Nov 2004
Location: Portland, OR
Posts: 62
|
Spartan Blades Wins Again @ Blade!
2017 American Made Knife of the Year® – Spartan Blades Kranos!
|
HaveBlue is offline
|
|
06-04-2017, 16:24
|
#2
|
Quiet Professional
Join Date: Apr 2008
Location: 18 yrs upstate NY, 30 yrs South Florida, 20 yrs Conch Republic, now chasing G-Kids in NOVA & UK
Posts: 11,901
|
__________________
Go raibh tú leathuair ar Neamh sula mbeadh a fhios ag an diabhal go bhfuil tú marbh
"May you be a half hour in heaven before the devil knows you’re dead"
|
JJ_BPK is offline
|
|
06-04-2017, 20:43
|
#3
|
Area Commander
Join Date: Dec 2010
Posts: 1,690
|
Congratulations for a job well-done!
|
Sohei is offline
|
|
06-05-2017, 07:17
|
#4
|
Quiet Professional
Join Date: Jan 2004
Location: Free Pineland
Posts: 24,780
|
Well done, Mark and Curtis!
Always great to see SF brothers doing well.
TR
__________________
"It is not the critic who counts; not the man who points out how the strong man stumbles, or where the doer of deeds could have done them better. The credit belongs to the man who is actually in the arena, whose face is marred by dust and sweat and blood; who strives valiantly; who errs, who comes short again and again, because there is no effort without error and shortcoming; but who does actually strive to do the deeds; who knows great enthusiasms, the great devotions; who spends himself in a worthy cause; who at the best knows in the end the triumph of high achievement, and who at the worst, if he fails, at least fails while daring greatly, so that his place shall never be with those cold and timid souls who neither know victory nor defeat." - President Theodore Roosevelt, 1910
De Oppresso Liber 01/20/2025
|
The Reaper is offline
|
|
06-05-2017, 13:17
|
#5
|
Guerrilla Chief
Join Date: Jan 2009
Location: Omaha, NE
Posts: 694
|
They earned it. And they're wonderful human beings, too.
|
DJ Urbanovsky is offline
|
|
06-07-2017, 08:10
|
#6
|
Bladesmith to the Quiet Professionals
Join Date: Feb 2004
Location: Oregon, Land of the Silver Grey Sunsets
Posts: 3,879
|
Well done Spartan Blades!
the kids, they grow up so fast
|
Bill Harsey is offline
|
|
06-12-2017, 12:26
|
#7
|
Quiet Professional
Join Date: Jan 2008
Location: Aberdeen, NC
Posts: 397
|
Thank You! We try hard and have been blessed!
|
mcarey is offline
|
|
06-28-2017, 13:27
|
#8
|
Quiet Professional
Join Date: Jan 2008
Location: Aberdeen, NC
Posts: 397
|
Kranos Another couple pictures
Some nice pics of a plain Ti with Carbon Fiber from Mr. Pittman.
|
mcarey is offline
|
|
06-28-2017, 19:18
|
#9
|
Quiet Professional
Join Date: Mar 2009
Location: Arizona
Posts: 5,222
|
Quote:
Originally Posted by mcarey
Thank You! We try hard and have been blessed!
|
What do you guys think about Bainite L6 steel? I've a Katana made in that, and altho not traditional, appears to be an excellent cutter of hard materials and keeps a razor edge.
|
PRB is offline
|
|
07-06-2017, 07:12
|
#10
|
Quiet Professional
Join Date: Jan 2008
Location: Aberdeen, NC
Posts: 397
|
Quote:
Originally Posted by PRB
What do you guys think about Bainite L6 steel? I've a Katana made in that, and altho not traditional, appears to be an excellent cutter of hard materials and keeps a razor edge.
|
Sorry but I am not familiar with the steel.
I looked up specs and it should is a tool steel (so not heavy on chrome (SS). Looks like great impact toughness, but I imagine from its specs it will not hold an edge for too long, but should resharpen easily. The heat treat band is very narrow, so that with proper quench will be critical. The temper and optional cryo treatment are key to getting the best performance from this steel by the specs. Be sure an keep is clean and lightly oiled when in storage.
|
mcarey is offline
|
|
07-06-2017, 07:56
|
#11
|
Quiet Professional
Join Date: Apr 2008
Location: 18 yrs upstate NY, 30 yrs South Florida, 20 yrs Conch Republic, now chasing G-Kids in NOVA & UK
Posts: 11,901
|
Congratulation to Mark and Curtis..
Quote:
Local Knife Maker Named Best in the U.S. — Again,,
LAURA DOUGLASS, Jul 5, 2017 Updated 16 hrs ago
Named for the Greek word for helmet, the Kranos folder began building buzz immediately at the International Blade Show in Atlanta, Ga.
“We took 30 to the show and entered one for the awards,” said Curtis Iovito, cofounder of Spartan Blades, a small knife manufacturing business located in Southern Pines. “We sold everything and the last one was in Mark’s pocket. We sold that one too!”
Sponsored by Blade magazine, the annual knife show brings together industry professionals, small and large manufacturers, custom builders, and collectors to view the newest knives on the market. Last year Spartan Blades won the coveted American Made Knife of the Year award for its Spartan-Harsey folder, or SHF, a collaboration between iconic knife maker and designer, William W. Harsey, Jr. and Spartan Blades.
This year the company did it again: the Kranos was recognized as the best knife made in the United States, an award voted on by Spartan’s competitors and peers.
“We were looking to improve on what we did last year,” Iovito said.
link:
|
__________________
Go raibh tú leathuair ar Neamh sula mbeadh a fhios ag an diabhal go bhfuil tú marbh
"May you be a half hour in heaven before the devil knows you’re dead"
|
JJ_BPK is offline
|
|
07-06-2017, 18:30
|
#12
|
Area Commander
Join Date: Jan 2011
Location: Western WI
Posts: 6,824
|
Awesome!
__________________
"Civil Wars don't start when a few guys hunt down a specific bastard. Civil Wars start when many guys hunt down the nearest bastards."
The coin paid to enforce words on parchment is blood; tyrants will not be stopped with anything less dear. - QP Peregrino
|
Badger52 is offline
|
|
07-07-2017, 10:58
|
#13
|
Quiet Professional
Join Date: Feb 2004
Location: Clarksville, TN
Posts: 1,159
|
I realize the answer is "If you have to ask, you probably can't afford it"
but ...
|
CSB is offline
|
|
07-07-2017, 14:50
|
#14
|
Quiet Professional
Join Date: Mar 2009
Location: Arizona
Posts: 5,222
|
Quote:
Originally Posted by mcarey
Sorry but I am not familiar with the steel.
I looked up specs and it should is a tool steel (so not heavy on chrome (SS). Looks like great impact toughness, but I imagine from its specs it will not hold an edge for too long, but should resharpen easily. The heat treat band is very narrow, so that with proper quench will be critical. The temper and optional cryo treatment are key to getting the best performance from this steel by the specs. Be sure an keep is clean and lightly oiled when in storage.
|
Thanks....it holds a great edge, one of its key properties along with flexability/ability to absorb impact. There are 3 Rockwell properties in the blade and with the proper quenching a martensite cutting edge. The maker demonstrates his blade chopping a 2/4 in half and then immediately cutting a piece of paper slowly.
The issue is it is difficult to work to get the proper hardness etc. and is expensive for a large blade.
I like it's impact absorption due to the different materials one can practice cut...Ive only made about 35 cuts so far on rolled 6" tatami but the edge is still razor sharp.
Sorry for the mis direct and congrats on your continued success
|
PRB is offline
|
|
08-03-2017, 09:30
|
#15
|
Guerrilla
Join Date: Feb 2008
Location: NC
Posts: 108
|
Congrats Mark, Curtis, and company, beautiful knife. Ya'll have come a long ways from the woodshed days. You probably don't remember our visit, I picked up a folder for my son who was just named to the NC Zone swim team and I wanted to get him something special for the work he had put in. Thanks for inspiring my son to continue to work hard and customising his blade into something special for him. You guys were an outstand voice in his ear. It's with him in Blacksburg now, training for ACC champs has already started for the VT swim team. Thanks again and congrats on the award.
|
tunanut is offline
|
|
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
|
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
All times are GMT -6. The time now is 05:40.
|
|
|