Go Back   Professional Soldiers ® > The Pipeline (Special Forces Training) > 18B

Reply
 
Thread Tools Display Modes
Old 02-13-2007, 14:11   #16
incommin
Quiet Professional
 
incommin's Avatar
 
Join Date: Apr 2006
Location: South Georiga
Posts: 797
It says here:


COPPER CONE - Using the jet-forming copper cone, the charge produces a jet which may be used to pierce holes, typically through 75mm (3 in) of mild steel or greater thicknesses of concrete or brickwork. It may be used for causing the detonation or deflagration of steel-cased ammunition without any risk of inadvertent disturbance of the target before firing. The usual explosive load is between 20 and 50g.

COPPER EXPLOSIVELY-FORMED PROJECTILE - A wide angled copper cone, essentially a slightly domed disc, generates an explosively-formed projectile (EFP) which may be used to penetrate robust targets at much greater ranges than the jet-forming cone. This enables the VULCAN to be used as a de-armer and disruptor device. It punctures 10mm thick steel at a range of at least 1,500mm.

ALUMINIUM PROJECTILE The aluminium projectile is able to deliver a powerful blow to shell fuses and bomb pistols thus removing them or jamming their mechanisms. It thus provides a low-priced, disposable, alternative to de-armers using heavy steel barrels.

MAGNESIUM INCENDIARY CONE - The jet formed by this cone is less penetrating than that formed by the copper cone but it is a less powerful initiator of detonation. It is used to penetrate even thick-walled shells or bombs and ignite the explosive or pyrotechnic filling. In this application it is much less likely to cause inadvertent high order detonation than other, more conventional, charges. It thus provides a reliable means of bringing about a “low order” deflagration event. The usual explosive load for this purpose is between 30 and 40g.

WATER PROJECTILE A conical cavity is formed in the explosive, water is poured into the cavity, and a plastic cone is inserted to retain the water. The charge thus becomes a shaped charge, able to penetrate steel-cased munitions with thicknesses of up to 10mm, and to disperse their contents with minimal risk of detonation. Charges are quickly assembled and robust.

High Explosive Anti-Tank (HEAT) Armor Piercing Shaped Charge
Armor piercing shells comprise a special type of anti-tank ammunition which is provided with a hollow charge warhead. In principle, a hollow charge comprises an outer casing, a metal cone and an explosive. When the explosive detonates, the metal cone is squeezed together and a metal jet is formed which, with great force, penetrates even very thick and hard armor. Due to its good effect in armored targets, the hollow charges have long constituted a serious threat to armored vehicles.

The High Explosive Anti-Tank (HEAT) rounds take a cone-shaped shaped charge warhead to targets. This shaped charge warhead, with its inherent blast and fragmentation capability, also provides additional weapon defeat capability. A copper shaped charge liner and wave shaper are contained within the warhead.

A sophisticated heavy two-stage shaped-charge warhead is capable of piercing armor of equivalent to 900mm thickness. A triple-shaped charge warhead offers 50mm more penetration. The RPG-7 grenade, with a shaped-charge warhead, has very good armor penetration (330 mm), capable of defeating most types of armored vehicles. Even a small 440 gram shaped-charge explosive is extremely destructive, and can penetrates more than 14 inches (35.6 cm) of armor. The M77 submunition's antimateriel capability is provided through a shaped charge with a built-in standoff, which can penetrate up to four inches of armor. The smaller artillery-delivered M46 submissions have a shaped charge warhead that penetrates 2.75 inches of homogeneous armor.

Explosively Formed Projectile (EFP)
Wide angle cones and other liner shapes such as plates or dishes do not jet, but give instead an explosively formed projectile or EFP. The projectile forms by dynamic plastic flow and has a velocity of 1-3 kms-l . Target penetration is much less than that of a jet, but the hole diameter is larger with more armour backspall.

The concept of using explosive energy to deform a metal plate into a coherent penetrator while simultaneously accelerating it to extremely high velocities offers a unique method of employing a kinetic energy penetrator without the use of a large gun. A typical explosively formed projectile (EFP) is comprised of a metallic liner, a case, an explosive section, and an initiation train. Very often there is also a retaining ring to position and hold the liner-explosive subassembly in place. EFP warheads are normally designed to produce a single massive, high velocity penetrator. After detonation, the explosive products create enormous pressures that accelerate the liner while simultaneously reshaping it into a rod or some other desired shape. The EFP then hits the target at a high speed, delivering a significantly high mechanical power.


Jim
__________________
Breaking a law or violation of a regulation is not a mistake. It is willful misconduct.

"If you love wealth more than liberty, the tranquility of servitude better than the animating contest of freedom, depart from us in peace. We ask not your counsel nor your arms. Crouch down and lick the hand that feeds you. May your chains rest lightly upon you and may posterity forget that you were our countrymen." [Samuel Adams]


Jim

Last edited by incommin; 02-13-2007 at 14:13.
incommin is offline   Reply With Quote
Old 02-13-2007, 14:37   #17
jwt5
Guerrilla
 
jwt5's Avatar
 
Join Date: Feb 2007
Location: New Mexico
Posts: 202
seen before..

I've seen these before. There are a lot of variants of this same design that we found my last deployment over there. Most were 'designed' to fire modified rockets. Not RPGs, but more like 40mm rocket type ammunition.
We actually found a few that had blown up and taken out their would be shooter.
OpSec in mind, in our AO it seemed they weren't using them on ground targets.

We also would run across a few that seemed to be designed with the 'EFP' shoulder fire mindset, of course with not so good effects on the shooter of said weapon.

Edit: I hope I didn't step outside my lane when posting here
jwt5 is offline   Reply With Quote
Old 02-16-2007, 10:15   #18
Snaquebite
Area Commander
 
Snaquebite's Avatar
 
Join Date: May 2006
Location: Raeford, NC
Posts: 3,374
Some additional coverage...

http://www.foxnews.com/story/0,2933,252409,00.html
__________________
D-3129 Life

"If one day you decide to know yourself...you'll have to choose the warrior path...You'll reach the darkness of your spirit.... Then, if you overcome your fears....You will know who you are."

"De Oppresso Liber"
Snaquebite is offline   Reply With Quote
Old 02-17-2007, 09:35   #19
Team Sergeant
Quiet Professional
 
Team Sergeant's Avatar
 
Join Date: Jan 2004
Location: Phoenix, AZ
Posts: 20,929
Quote:
Originally Posted by Snaquebite
Saw this earlier and have no idea. I put it in Photoshop and enlarged it a bit.
Click to enlarge
Attachment 7194

Wouldn't be surprised if it's something being made by Hezbollah. They are manufacuting a lot of things these days.
Has any SF’er got a definitive answer???
__________________
"The Spartans do not ask how many are the enemy, but where they are."
Team Sergeant is offline   Reply With Quote
Reply


Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is Off
HTML code is Off

Forum Jump



All times are GMT -6. The time now is 12:28.



Copyright 2004-2022 by Professional Soldiers ®
Site Designed, Maintained, & Hosted by Hilliker Technologies