Old 10-22-2016, 15:02   #1
Sdiver
Area Commander
 
Sdiver's Avatar
 
Join Date: Feb 2004
Location: The Black Hills of SD
Posts: 5,917
Question for the Bravos ....

Now don't all stampede over yourselves answering this question .. "Oh, I know, I know, I know !!!!", so here goes ....

Have a friend who found an M1 Garand for a nice price, but it's a .308
I told him to get it, but if he does, we wouldn't be able to share clips (mine's a 30.06)
He said that, that shouldn't be a problem. That a 30.06 should be able to fire down a .308.

Now I'm only a medic and don't really know bang-bang stuff, but with my limited thinking on this, I would think that it wouldn't be possible. The .308 if fired down a 30.06 would be too big and get stuck, causing a "weapon malfunction", where as a 30.06 fired down a .308 would be too loose and not fly straight and narrow.

So, answer away. Is it possible to fire the different calibers down the different weapons, or is it a recipe for disaster?
__________________
Non Sibi Sed Suis
_____________________________________________
It's Good To Be Da King !!!! Just ask NDD !!!!
Sdiver is offline   Reply With Quote
Old 10-22-2016, 15:23   #2
Bettendorf
Quiet Professional
 
Bettendorf's Avatar
 
Join Date: Sep 2009
Posts: 191
.308 (7.62mmX51mm)

30.06 (7.62mmX64mm)

Both are .30 cals. 30.06 gets its name because it's .30cal and it was made it 1906, hence the "06".
Bettendorf is offline   Reply With Quote
Old 10-22-2016, 22:47   #3
craigepo
Quiet Professional
 
craigepo's Avatar
 
Join Date: Dec 2008
Location: Southern Mo
Posts: 1,541
Same bullet, 30-06 has much longer brass.

No workie
__________________
"And how can man die better than facing fearful odds, for the ashes of his fathers, and the temples of his gods?"
Thomas Babington Macaulay


"One man with courage makes a majority." Andrew Jackson

"Well Mr. Carpetbagger. We got something in this territory called the Missouri boat ride."
Josey Wales
craigepo is offline   Reply With Quote
Old 10-22-2016, 23:09   #4
Toaster
Guerrilla
 
Join Date: Apr 2012
Location: Ft. Polk
Posts: 264
The En Bloc clips can be interchanged, the cartridges can't...IIRC the .30-06 is the parent case of the .308.

I'm away from my Garand, though I wouldn't try feeding a 308 into a 30-06.

It's best to use hard primers or mil-surp ammo in Garands, they can sometimes set off commercial ammo when driving the round into the chamber. I've heard of out of battery accidents and shooting in auto due to inappropriate ammo.

Some manufacturers make ammo for the M1/M1A rifles due to that issue.
__________________
You can change what you are and where you are by changing what you put into your life. -Zig Ziglar


"Nothing is more dangerous than an NCO or Officer who has been taught a technique or method, but doesn't understand the underlying principles or the "why" behind it." -MtnGoat

"How can someone improve their ability to lead? Die to self.

The most rewarding thing a leader will receive is having someone place their life in your hands and say, I will follow you." -SGT Gary Beikirch
Toaster is offline   Reply With Quote
Old 10-23-2016, 04:49   #5
JJ_BPK
Quiet Professional
 
JJ_BPK's Avatar
 
Join Date: Apr 2008
Location: 18 yrs upstate NY, 30 yrs South Florida, 20 yrs Conch Republic, now chasing G-Kids in NOVA & UK
Posts: 11,901
Size matters..

The 30.06 is longer. There is little change that the properly loaded cartridge will load into the ammo well, let alone the chamber.

Here is the story about conversion of the 30.06 rifles to 7.62 for the Navy..

https://www.americanrifleman.org/art...garand-rifles/

If your friend's rifle is one of the converted rifles,, it is a collector and should not be diddled with. Read the fine print,, they used chamber sleeves to accommodate the shorter 7.62, changed the slide follower-bullet guide, and altered the gas post.

If your friends rifle has Italian markings, it may have been re-engineered by Beretta.

Nice find in either case..

Size comparisons:
Attached Images
File Type: jpg 308Win.JPG (34.5 KB, 20 views)
File Type: jpg 3006sprg.JPG (34.3 KB, 19 views)
File Type: jpg M1 SCHEMAS (7A).jpg (53.1 KB, 17 views)
File Type: jpg assembly-exploded-diagram-full.jpg (111.3 KB, 12 views)
__________________
Go raibh tú leathuair ar Neamh sula mbeadh a fhios ag an diabhal go bhfuil tú marbh

"May you be a half hour in heaven before the devil knows you’re dead"
JJ_BPK is offline   Reply With Quote
Old 10-23-2016, 09:33   #6
The Reaper
Quiet Professional
 
The Reaper's Avatar
 
Join Date: Jan 2004
Location: Free Pineland
Posts: 24,779
Quote:
Originally Posted by Toaster View Post
The En Bloc clips can be interchanged, the cartridges can't...IIRC the .30-06 is the parent case of the .308.

I'm away from my Garand, though I wouldn't try feeding a 308 into a 30-06.
Correct.

The bullets are exactly the same, but the .308 case (7.62x51mm) is a different length than the .30-'06 (7.62x63mm).

The .30-'06 will not chamber in a .308 rifle and it is unsafe to try to fire a .308 in a rifle chambered for .30-'06.

IIRC, the en-bloc clips are the same as they depend on case diameter to load.

The modern .308 conversions use a barrel chambered for .308 (or 7.62x51, depending on the reamer), the old Navy conversions generally used a chamber insert which would occasionally eject with the fired case.

Hope that helps.

TR
__________________
"It is not the critic who counts; not the man who points out how the strong man stumbles, or where the doer of deeds could have done them better. The credit belongs to the man who is actually in the arena, whose face is marred by dust and sweat and blood; who strives valiantly; who errs, who comes short again and again, because there is no effort without error and shortcoming; but who does actually strive to do the deeds; who knows great enthusiasms, the great devotions; who spends himself in a worthy cause; who at the best knows in the end the triumph of high achievement, and who at the worst, if he fails, at least fails while daring greatly, so that his place shall never be with those cold and timid souls who neither know victory nor defeat." - President Theodore Roosevelt, 1910

De Oppresso Liber 01/20/2025
The Reaper is offline   Reply With Quote
Old 10-23-2016, 13:50   #7
Sdiver
Area Commander
 
Sdiver's Avatar
 
Join Date: Feb 2004
Location: The Black Hills of SD
Posts: 5,917
Thanks all for the responses.

I'll pass along the info.
__________________
Non Sibi Sed Suis
_____________________________________________
It's Good To Be Da King !!!! Just ask NDD !!!!
Sdiver is offline   Reply With Quote
Old 10-23-2016, 16:05   #8
BKKMAN
Quiet Professional
 
BKKMAN's Avatar
 
Join Date: Aug 2009
Location: PNW
Posts: 685
I was on a foreign and US weapons familiarization range where .308 ammo was mistakenly loaded into a .30-06 weapon.

Luckily, no harm came to humans or weapons.

The .308 brass came out of the weapon looking like overly long .45 brass, because the shorter round wasn't able to seat fully forward so the cartridge case neck was getting distended/blown out by the pressure in the chamber...picture attached that I grabbed from Google...amazing how many "oops" images of this exact fxxx up are out on the internet
Attached Images
File Type: jpg Oops.JPG (25.2 KB, 46 views)
__________________
The worst form of inequality is to try to make unequal things equal. Aristotle

It is not inequality which is the real misfortune, it is dependence. Voltaire
BKKMAN is offline   Reply With Quote
Old 10-23-2016, 21:35   #9
Peregrino
Quiet Professional
 
Peregrino's Avatar
 
Join Date: Jun 2004
Location: Occupied Pineland
Posts: 4,701
Tell your friend to research his rifle. He needs to know more about it than just caliber. If he's fortunate enough to have stumbled across a collector gun (highly unlikely but possible) he needs to treat it accordingly. If it's one that has been converted "aftermarket" he needs to have it inspected by a specialist who understands the quirks related to the conversion. If it's complete and correct, tell him to have fun but exercise good judgement. In today's world, Garands require a little more care and feeding than they did when they went to war and the only ammo they got was issued by Uncle Sam. FWIW - I have several M1Gs. One is a .308. A little ATD and some basic segregation discipline goes a long way towards preventing KABOOMs.

If it doesn't already have one (it should!) tell him to get a spacer block - http://www.fulton-armory.com/spacerblockf308cal.aspx. That'll help keep 30-06 ammo out of his action. And don't shoot his ammo in your rifle. Problem solved. No rocket science involved.
__________________
A nation can survive its fools, and even the ambitious. But it cannot survive treason from within. An enemy at the gates is less formidable, for he is known and carries his banner openly. But the traitor moves amongst those within the gate freely, his sly whispers rustling through all the alleys, heard in the very halls of government itself. For the traitor appears not a traitor; he speaks in accents familiar to his victims, and he wears their face and their arguments, he appeals to the baseness that lies deep in the hearts of all men. He rots the soul of a nation, he works secretly and unknown in the night to undermine the pillars of the city, he infects the body politic so that it can no longer resist. A murderer is less to fear.

~ Marcus Tullius Cicero (42B.C)
Peregrino is offline   Reply With Quote
Old 10-25-2016, 11:17   #10
x SF med
Quiet Professional
 
x SF med's Avatar
 
Join Date: Apr 2006
Location: In transit somewhere
Posts: 4,044
Use the specified ammo for the rifle/pistol/revolver/rocket launcher... common sense.
__________________
In the business of war, there is no invariable stategic advantage (shih) which can be relied upon at all times.
Sun-Tzu, "The Art of Warfare"

Hearing, I forget. Seeing, I remember. Writing (doing), I understand. Chinese Proverb

Too many people are looking for a magic bullet. As always, shot placement is the key. ~TR
x SF med is offline   Reply With Quote
Reply


Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is Off
HTML code is Off

Forum Jump



All times are GMT -6. The time now is 16:43.



Copyright 2004-2022 by Professional Soldiers ®
Site Designed, Maintained, & Hosted by Hilliker Technologies