How to post a picture...

[Bill Harsey]

Just trying to teach myself how to put an image in here...sumbitch won't do it.

[Bill Harsey]

still trying to get one to upload...can't do it.

[The Reaper]

Just trying to teach myself how to put an image in here...sumbitch won't do it.

Bill after you manage attachments, browse for it and locate the file, are you using the "Upload" key?

The attachment should appear in the Attach Files box below your post.

TR

[Ambush Master]

Bill,

E-mail it to me and let me figure out what the prob is !! Then, I'll be able to "walk ya through" the steps !!

Please launch it !!
Martin

[Kyobanim]

I was making the mistake of not clicking the upload buddon and waiting for it to finish.

[The Reaper]

still trying to get one to upload...can't do it.

Make sure that you are checking the upload box after attempting to acquire the file to ensure that there are no error messages.

Call me and I will walk you through it.

TR

[Bill Harsey]

I'll try one more time.

I go to manage attachments, browse and then select a file by clicking on it and then hitting "open".

Then I click on upload and get "fuck you Cannot Find Server This Page Cannot Be Displayed" over and over again. I have no problems sending these pics via attached files in an email.

[Ambush Master]

"fuck you Cannot Find Server This Page Cannot Be Displayed" over and over again. I have no problems sending these pics via attached files in an email.

Dauum !! I aint never seen that one !!!! :D

Bill, send em to me and let me have a look at what you are attempting to upload.

Do take care.
Martin

[SP5IC]

Junior's graduation from VMI in May of 2003.

[Kyobanim]

Then I click on upload and get "fuck you Cannot Find Server This Page Cannot Be Displayed" over and over again. I have no problems sending these pics via attached files in an email.

Now I know what you're doing wrong. You're not clicking the "Don't Fuck with me" button before you upload the file.

[Bill Harsey]

SP51C, Great picture! Congratulations on the graduation.

I've been working on a knife for something kinda important today so I haven't bugged you guys anymore about this.

I think Kyobanim nailed it. I even went to my security settings to make sure nothing there seemed to be restricting me.

AM and TR, I was just testing to see how to send an image from here. Since I got the good tri-pod, the quality of my pics has gone way up. duuuuh.

I'll try one more time, (no bad words this time...) Won't do it, same as before. Don't you guys tell any girls about this.

[Bill Harsey]

Dauum !! I aint never seen that one !!!! :D

Bill, send em to me and let me have a look at what you are attempting to upload.

Do take care.
Martin
Martin, I was just picking out any jpg from my shop pics. I'll send you the same one I've tried to send here if that would help.

[Kyobanim]

Don't you guys tell any girls about this.

Don't you think it's a little late for that? :o

[Ambush Master]

I'll try one more time, (no bad words this time...) Won't do it, same as before. Don't you guys tell any girls about this.

Wayyy tooo late Mr. Bill !! This was not xmitted in a PM, it's in a PUBLIC FORUM !!! I'm sure that FS will jump all over this shortly !! :munchin

[Bill Harsey]

Don't you think it's a little late for that? :o
They wouldn't lower themselves to be seen in some joint called "knuckle Draggers'

[Bill Harsey]

Martin, I'll email ya the pic now. I know this is public...

[Bill Harsey]

last try.....same result.

[alphamale]

Now I know what you're doing wrong. You're not clicking the "Don't Fuck with me" button before you upload the file.Kyobanim, that's downright mean sir! :)


I'll try one more time, (no bad words this time...) Won't do it, same as before. Don't you guys tell any girls about this.::hands over ears:: lalalalala

Pic 1) Early Harsey Tools sketches

Pic 2) The Geek Admittance doors, once passed through, entitles One Mr. Harsey (I'm not gutsy enough to use the name TR lays on him :-) to a Geek Pocket Protector upon said completion of task and a discussion of calculating FFTs (Fast Fourier Transformations)

[Ambush Master]

Like this ???

[The Reaper]

Like this ???

Now THAT, is a grinder!!

TR

[Ambush Master]

Following is from the Admin Control Panel:

(This comes out kinda scrunched together, but you can figure it out.)


Attachment Manager

Error! Hyperlink reference not valid.Error! Hyperlink reference not valid.Edit Attachment Types
Extension Maximum Filesize Max Width Max Height Enabled Controls
gif 1048576 800 600 Yes [Edit] [Delete]
jpe 1048576 800 600 Yes [Edit] [Delete]
jpeg 1048576 800 600 Yes [Edit] [Delete]
jpg 1048576 800 600 Yes [Edit] [Delete]
pdf 1048576 Yes [Edit] [Delete]
png 1048576 800 600 Yes [Edit] [Delete]
psd 1048576 None None Yes [Edit] [Delete]
txt 1048576 Yes [Edit] [Delete]


vBulletin v3.0.3, Copyright ©2000-2004, Jelsoft Enterprises Ltd.

[Bill Harsey]

Like this ???
Yes that was the test image I was trying to upload.

This is about as frustrating as it gets. It's like you dial a phone no. and it works fine so I dial the same no. using the same equipment and it wouldn't work if my life depended on it. Doing math now to add up how much all this equipment costs including DSL and will add this in to how happy this makes me.

[Bill Harsey]

Following is from the Admin Control Panel:

(This comes out kinda scrunched together, but you can figure it out.)


Attachment Manager

Error! Hyperlink reference not valid.Error! Hyperlink reference not valid.Edit Attachment Types
Extension Maximum Filesize Max Width Max Height Enabled Controls
gif 1048576 800 600 Yes [Edit] [Delete]
jpe 1048576 800 600 Yes [Edit] [Delete]
jpeg 1048576 800 600 Yes [Edit] [Delete]
jpg 1048576 800 600 Yes [Edit] [Delete]
pdf 1048576 Yes [Edit] [Delete]
png 1048576 800 600 Yes [Edit] [Delete]
psd 1048576 None None Yes [Edit] [Delete]
txt 1048576 Yes [Edit] [Delete]


vBulletin v3.0.3, Copyright ©2000-2004, Jelsoft Enterprises Ltd.
no I can't. I've never seen anything like this before.

[Bill Harsey]

AM, Was my file too big? If so that still doesn't explain the complete disconnect between my computer and this program when attempting an upload. screw this crap, I've got work to accomplish in the shop. Thanks for your help folks.

[Ambush Master]

OK, here goes the explanation,(I tried to call you but there was no answer,)

The letters on the left are the viable file types referred to as File Extensions ie .gif, .jpe, etc. Next is the Max File Size ie 1,048,576 bytes. Next is the Max Width 800 Pixels and Max Height 600 Pixels. That is all you need to be concerned with. If your picture's file size is beyond that limit or it is bigger than 800X600, the upload will fail.

I'll talk atchya later.
Martin

[Sacamuelas]

As to the connection to server/error white out screen showing up:

Bill... mine does that to me sometimes too. It usually still puts the post with pic on the board though. I end up with double posts sometimes because of it. Not sure why it does it... I'm no help in that regard. Good luck

[Bill Harsey]

Saca, I'm screwed, I can't make this computer do it.

I'm loading No. 4 mags in the 12 gauge now to put this thing out of it's misery.

:mad: :mad: :mad:

[Bill Harsey]

trying one more time... AMBUSH MASTER!!! CHECK THIS OUT!!! IT WORKS!!! THANKYOU!!! :lifter

oh yeah, the pic is the pre weld set-up on my new tilt table knuckle for the big belt grinder. That's two and one half inch OD Shelby seamless tubing, one half inch wall thickness. Note the tapered micarta wedges at the right end to keep the parts to be welded together. That's a custom harsey built brass hammer with African Bubinga handle for light tapping jobs. Note greenery, this is my outddor welding table. I can put the fires out easier outside.

[Kyobanim]

Okay, so how'd you do it? Upload the pic, I mean.

[Ambush Master]

Okay, so how'd you do it? Upload the pic, I mean.

Bill had a File/Image Size problem and did not have any utilities to re-size his Pics. In talking with him he mentioned that he had Windows XP, so I went to the MS website and found a Resizing Utility. I sent him the Link & he downloaded it !! Now he can resize away !!!

Harsey with a computer = same same Caveman with Motorcycle !! :D

[Bill Harsey]

Okay, so how'd you do it? Upload the pic, I mean.
Ambush Master called, assured me he had the training and experience to work with people of an eight year old mentality. He then found the Windows Image Resizer download, emailed me the link and helped me click on buttons until that appeared on my machine.

Now when I right click an image, I have the option to resize it. Image Resizer re-sizes it to "medium" (600 by 800 pixels), automatically generates a new "medium" file of the same image without changing the original picture and the result is posted here. :lifter still lifting...

[Sacamuelas]

Good deal.
You da' man BILL.... also homage to the Silent deadly one - Ambush Master. :lifter

[Guy]

Ambush Master called, assured me he had the training and experience to work with people of an eight year old mentality. He then found the Windows Image Resizer download, emailed me the link and helped me click on buttons until that appeared on my machine.

Now when I right click an image, I have the option to resize it. Image Resizer re-sizes it to "medium" (600 by 800 pixels), automatically generates a new "medium" file of the same image without changing the original picture and the result is posted here. :lifter still lifting...

The larger # goes in front of the smaller. :D

[Bill Harsey]

Thanks Guy, I'll remember that.

Hopefully here's the finished weld, done with 1/8th inch 7018 low hydrogen welding rod at about 175 amps. Note the turned brass bushing still fits, it had .002" ( two thousandths of an inch) before the weld. Joint was designed to minimize warping.

[Bill Harsey]

Here's the nearly finished tilt table in front of my main belt grinder, also a Harsey Built machine. That's a two horse motor, 4 speed with the 10 inch dia. contact wheel in front.

This is the grinder I do all my blade grinding on, without any table on the front to date. I have special project coming up that needs the fine adjustable angle table.

[SP5IC]

I have down loaded it several times; first I could not find it, then I could not get anything but the Read Me txt to open. Is there help out there? I have a few interesting RVN shots from IV Corps, maybe one or two of steely-eyed killers.

http://www.microsoft.com/windowsxp/downloads/powertoys/xppowertoys.mspx

[Ambush Master]

I have down loaded it several times; first I could not find it, then I could not get anything but the Read Me txt to open. Is there help out there? I have a few interesting RVN shots from IV Corps, maybe one or two of steely-eyed killers.



We downloaded this to his Desktop and then executed it. Went very quickly !!

http://download.microsoft.com/download/whistler/Install/2/WXP/EN-US/ImageResizerPowertoySetup.exe

[Bill Harsey]

I have down loaded it several times; first I could not find it, then I could not get anything but the Read Me txt to open. Is there help out there? I have a few interesting RVN shots from IV Corps, maybe one or two of steely-eyed killers.

http://www.microsoft.com/windowsxp/downloads/powertoys/xppowertoys.mspx
Martin could teach a rock ape to drive a cargo plane. Any luck yet?