View Full Version : Free float rail system on M4's..........
Ok guys, figured I would throw this one in here, since everyone seems to be going away from the "ghetto" grip and moving towards a more forward grip on the M4's with long barrels. Recently, I have seen several guys running free float rail systems on the long barrels in order to get some more real estate on the fore end.
The rest of the team seems to want these, but with everyone spread 3 sheets to the wind in schools right now, its hard to nail down something specific that will actually work.
Any suggestions from guys may have gone this route?
Sinister
08-07-2012, 21:08
Since Knight's no longer makes their MRE you can get Troy Industries "Battle Rail - Charlie" to fit on M4s without gunsmithing or armorer acrobatics -- the base gun is not altered or modified:
http://troyind.com/wp-content/uploads/Troy-BattleRail-Charlie-22.jpg
Daniel Defense make the RIS II for the M4 with a standard front sight.
https://danieldefense.com/rail-systems/m4a1-fsp-rail-interface-system-ii-ris-ii.html
I'm not a QP by any means so if I'm out of line I apologize, but Samson also makes a front sight cut-out/pocket rail (STAR CXR http://www.samson-mfg.com/ar-15_html/product/STAR-CXR.html) and Midwest Indsturies makes one as well (MCTAR-20XG2 http://www.midwestindustriesinc.com/index.cfm?fuseaction=category.display&category_ID=422).
Both require removal of the delta ring though.
Daniel Defense make the RIS II for the M4 with a standard front sight.
https://danieldefense.com/rail-systems/m4a1-fsp-rail-interface-system-ii-ris-ii.html
We have been trying to get the RIS II with low profile gas blocks for a minute or two. DD doesn't have any in stock, nor does anyone else that I can find. It's like chasing a unicorn.
On a side note, if you replace the barell on the Mk18 short upper with a longer barell, you have more rail space then the mil spec M4s. Of course, crane may get mad at you, if you care about that.
We have been trying to get the RIS II with low profile gas blocks for a minute or two. DD doesn't have any in stock, nor does anyone else that I can find. It's like chasing a unicorn.
On a side note, if you replace the barell on the Mk18 short upper with a longer barell, you have more rail space then the mil spec M4s. Of course, crane may get mad at you, if you care about that.
Don't know how many you need but they have some in stock.
https://www.primaryarms.com/Daniel_Defense_M4A1_FSP_Rail_Interface_System_FDE_ p/dd-8030-fde.htm
Don't know how many you need but they have some in stock.
https://www.primaryarms.com/Daniel_Defense_M4A1_FSP_Rail_Interface_System_FDE_ p/dd-8030-fde.htm
We are looking for 13 of them. After taking some of the info in from other guys, and talking with the rep from Daniel Defense, then bouncing that off of S-8............we may have a solution.
Will keep you guys informed.