High Speed

[NousDefionsDoc]

How does the knife sheath attach to the drop leg panels on your website? Is it a special sheath?http://www.highspeedgearinc.com/IMAGES/droplegmagazine/droplegmagazine.jpg

[Air.177]

I have one of the HSGI drop leg Panels and it has a space behind the Pals webbing for a knife to go. That being said, I could not figure out how to mount one there, and would like to know also.

Thanks

[Psywar1-0]

There are 2 velcro loops that go around the knife sheath. One is on the drop leg strap and goes thru the belt loop of the sheath, the other is down inside the pocket and keeps the sheath from moving. I prefer to also use a zip tie in conjunction with the belt loop strap.

[molsen]

Psywar1-0 pretty much got it, but the sheaths that Gene uses are kydex G-Code sheaths. That's what he sent me for my Kabar when I got one of his PALS leg panels. His leg panels are designed to work with those sheaths.

[The Reaper]

Hey, Gene:

If we call to order stuff, who should we ask for?

TR

[Psywar1-0]

Dam I purchased 2 of the leg pannels and never got a sheath!

[High Speed]

I don't supply knife sheaths with the leg panels , as I do not know what knife you may have . However , I can obtain them from G-Code if I knew what knife you have . Most any flat Kydex knife sheath will work . Best is the knife sheaths that have the 2 sets of leg strap slots within them . Using the upper slots , thread the velcroed strap within and secure them . Second strap goes up above to secure the knife sheath's belt hanger to panel hanger . Always dummy loop or secure by other means as a precaution . Bottom of the panels are left open , due to longer knives . There is a D-ring to secure bottom of knife sheath as well if needed .
Now if you do not have leg strap slots on your sheath . Some sheaths have gromment that hold the sheaths parts together . Then you may hand sew or attach by means of cords or ties to the mesh suspension platform . Even a leather knife sheath , you can take a 1/64 drill and make holes to allow thread to pass through to secure to the mesh platform as well .
Keep in mind , the thinner the sheath , the more comfortable you will maintain . My thoughts of allowing the knife sheath behind panels were to allow more space on the belt and removing the need of extra leg straps .

If you call the shop , any of the girls may help you . However , they will assist you in the best way they can . If you need a ear full , then ask for me ! :D

Gene

[The Reaper]

Wiil do Gene, Thanks!

TR

[NousDefionsDoc]

I do not know what knife you may have

WTF?

http://www.professionalsoldiers.com/forums/attachment.php?s=&postid=22529

:D

Why didn't the picture show up? DAMN!

[Team Sergeant]

Originally posted by NousDefionsDoc

Why didn't the picture show up? DAMN!
I know.....

[NousDefionsDoc]

What did I do wrong?

[Ambush Master]

Originally posted by NousDefionsDoc
WTF?


Why didn't the picture show up? DAMN!

I guess it's some of that Commo FM. Freakin' Magic !!!!:D

[Ambush Master]

Originally posted by NousDefionsDoc
What did I do wrong?

You ain't a Fuckin MAGICIAN !!!!:D

[NousDefionsDoc]

Originally posted by Ambush Master
You ain't a Fuckin MAGICIAN !!!!:D

Stop picking on me you bully!:lifter

[Air.177]

Back to the topic at hand,

I mounted My Blade Tech Ka-Bar sheath to my HSGI panel with a Single small size MALCE clip. Took about 5 minutes this morning. I got to looking through my kit bag and found the panel and the knife and then thought of the MALICE clips. I'll post pics when I get the chance.

[NousDefionsDoc]

Got my HSGI tactical CQB suspenders. They're the heat.

Mr. Harsey - they're braces for SF dudes. LOL

[NousDefionsDoc]

Originally posted by Air.177
Back to the topic at hand,

I mounted My Blade Tech Ka-Bar sheath to my HSGI panel with a Single small size MALCE clip. Took about 5 minutes this morning. I got to looking through my kit bag and found the panel and the knife and then thought of the MALICE clips. I'll post pics when I get the chance.

Well, its been two months, where are the damn pics RL?

[Air.177]

Originally posted by NousDefionsDoc
Well, its been two months, where are the damn pics RL?
Whoa Whoa! Hold on now, a little excessive don't you think. I'll get them on here as soon as possible. Maybe even within the next two days:D

[Ambush Master]

OK, here's the Knife pics for AIR.

[Ambush Master]

#2

[Ambush Master]

#3

[Ambush Master]

#4

[Ambush Master]

#5 and last !!

[Ambush Master]

And that's all there are to it !!:D

[NousDefionsDoc]

Thanks AM.

[Roguish Lawyer]

Originally posted by NousDefionsDoc
Well, its been two months, where are the damn pics RL?

Are you talking to me?

[NousDefionsDoc]

No, I was calling Air.90210 RL because he's about as slow as your are with da comms.:D

[NousDefionsDoc]

Mr. Harsey,
I think that AF Fighter kydex sheath fill fit right in there, don't you?

[eggroll]

FWIW it should fit as the panel can accomodate up to about a 7" blade

EGG

[NousDefionsDoc]

Roger, the AF is 6". Should fit like it was made for it.

[Air.177]

Originally posted by NousDefionsDoc
Roger, the AF is 6". Should fit like it was made for it.
So is the MALICE clip deal a go, or Not?

Come on now if you're going to bust my chops on this; at least give me feedback:munchin

[NousDefionsDoc]

Most affirmative a go. Good job.

[Air.177]

Glad to be a help.

Good Times

[NoRoadtrippin]

Hey has any one had any commo with Gene or the guys at HSGI lately? I see that he hasn't been around here in awhile, and I haven't been getting the prompt email responses I typically get from them.

Last time we talked, he did say they were real busy, but I'm talking like a two month delay in hearing back from him. Just curious if any one else has been in touch?

[The Reaper]

Hey has any one had any commo with Gene or the guys at HSGI lately? I see that he hasn't been around here in awhile, and I haven't been getting the prompt email responses I typically get from them.

Last time we talked, he did say they were real busy, but I'm talking like a two month delay in hearing back from him. Just curious if any one else has been in touch?

My emails to him have gone without any response for several months.

TR

[NoRoadtrippin]

Interesting. Thanks for the reply TR.

I had some communication with him back at Christmas that went just fine and I got a modified rig as a gift in time for the holiday. Since then it has been down hill. I did get one email back in January explaining a shorter delay as being "detained with other business." No way to tell of course if this just means super busy or if there is some behind the scenes issue(s). He has uploaded 2 new (and rather cool) items on the site in the past 2-3 weeks though so something must be still kicking over there.

I suppose I will check some other sources for a couple items I was needing.

[High Speed]

Hey guys , still around . Just taking the back seat for awhile . Hips have been killing me making it hard to get around . Plus I am trying to get caught up with all the custom work . Just a thought , thousands of you guys and only one of me . Hired a new guy to watch the front door until I'm able to drive again . Topher is his name (topher@hsgi.us) . He can handle just about everything except custom orders at which I only receive .
Got a lot of irons in the fire with big jobs and more on the horizon . The Gals in the shop are running like raped apes trying to full-fill all the orders to get them out as quickly as possible . If I missed anyone's e-mail , my apology . It's been overwhelming to say the least to juggle everything that is going on right now . Please e-mail me again if I missed anyone .

Gene @ HSGI

[NoRoadtrippin]

Hey Gene,

Sorry to hear you aren't feeling well. Thanks for the communication. I am sure you've got my numerous emails, but I will wait a few days and then hit you back up again if I don't hear from you. I'm relieved to hear you guys are still around and just swamped. I'd be up a creek without all your great gear.

NR

[NoRoadtrippin]

I am torn as to whether or not I should have posted this comment, but in the end I feel like the only recourse I have as a customer is to share my experience with others in hopes that it will motivate an improved response from a business if their customer base becomes unhappy.

As best I can calculate, I have spent in excess of $700 with HSGI since early 2008. To me, that's a decent amount of money spent on a single maker's nylon. Maybe I am considered small fries in the big picture, and that has been the reason my current inquiries are being ignored.

My initial orders with HSGI were always dealt with promptly and with excellent communication. Upon ordering my first rig in 2008, Gene sent me personal emails and extended a sale price past the initial deadline as he was gone to SHOT when I was trying to order. Other orders in '08 through December '09 were great. Topher, the staff member mentioned by Gene above, went so far as to email about a color I chose for an item in one order when he saw that it did not match the other items. Great service...going the extra mile...

In December '09, I ordered a custom Warlord with a number of modifications. Gene and I emailed multiple times and spoke on the phone as we nailed this down. Everything went great and I had a fantastic Christmas gift by the 25th.

Here is the commo I started with him as of January. Please bear with me, I wanted to give an honest picture of why I am so frustrated with a company I like so much.

from <d.****.****@gmail.com>
sender-time Sent at 22:14 Current time there: 4:34 PM. ✆
to Sales <sales@hsgi.us>
date Wed, Jan 27, 2010 at 22:14
subject B**** Custom Warlord

Hey Gene,

I am loving my Warlord so far. Its great having the additional columns and features. I want to try and perfect just a couple of things.

The first is the hydration carrier attachment points. I think I probably shot myself in the foot with this one by requesting the velcro loops for routing. The fastex buckles are just too far back for my liking. I want the hydro carrier to ride higher up. I.e. reducing the distance between the 2 1/2" main buckle and the 1" hyrdo carrier buckle.

The only other thing has to do with the shoulder straps as well. I still really want to try and close the unpadded gap under the 2 1/2" buckles. That was a big issue for me on the other rig after wearing it for a number of hours.

I think my straps could be modified, but I would need completely new pads. Do you want me to send out my current straps? Or I can send both the pads and straps and you can resell these. They haven't seen any hard use yet. Just some trial runs.

I'd also like to see if the pads could be narrowed any? There doesn't seem to be a lot of room, but about a half inch narrower would be great for me.

Thanks so much.

B

___________________

from B <d.********@gmail.com>
sender-time Sent at 10:47 (GMT-06:00). Current time there: 4:34 PM. ✆
to Sales <sales@hsgi.us>
date Wed, Feb 3, 2010 at 10:47
subject Fwd: Custom Warlord
mailed-by gmail.com

Hi Gene and company,

I just wanted to be sure you had gotten the below email from me as a follow up to the Warlord you made me.

Thanks,

B

- Show quoted text -

[SAME EMAIL AS ABOVE REPEATS. CUT TO SAVE SPACE]

_________________

from Sales <sales@hsgi.us>
sender-time Sent at 06:54 (GMT-05:00). Current time there: 5:35 PM. ✆
to B <d.********@gmail.com>
date Thu, Feb 4, 2010 at 06:54
subject Re: Custom Warlord

hide details Feb 4

B ,
Sorry for the delayed response . I have been detain with other business , so it was hard for me to respond . I'll get a set of them pads made for you as decribed [THESE NEVER CAME] . As far as the width , I will try . Sewing the binding tape on the pads edges is a tedious process . It is also more difficult binding the corners . I'll try to narrow them , but cannot make any promises on the width . Just keep the pads you have for spares .
Before I try to narrow the pad , try routing your hydration tube on the outside of the shoulder straps , under the pad's securing straps . Try that to see if that helps . You also might want to relocate the top hydration straps from the uni-loops down to the carriers MOLLE webbing . This will raise the carrier some and might take up so excess space .

Gene

__________________
|
B ✆
to Sales

show details Feb 4

No worries, I completely understand and don't mean to be impatient at all. I just wanted to make sure it had come through all right.

All of that sounds good on the pads. I understand if they cannot be narrowed. In the response, you mentioned the pad changes but not the changes do the actual buckle locations on the straps, I just want to make sure you saw those as well. Also, I really appreciate you doing all of this. Are you sure I can't send you mine to alter or resell? I don't want you to have to spend a bunch of unpaid time working to change something I asked for in the first place. Just let me know what I owe you.


B

____________________
|
Sales ✆
to me

show details Feb 4

Hey , As long as your patient , so am I , LOL !
I cannot mod the pads because of the neoprene . Being rubber based , it hard to sew on the sewing machine . We have to sew it upside down , as the rubber is like throwing on the brakes ! Rubber will not slide on metal . We even have to put a paper barrier , sew and then remove the paper and it gets messy . Tight turns on the binding machine is a BEAR too .
We look at it this way , We want our customer HAPPY with our gear . And if it takes some extra effort to do , well be it . We do not sweat the small stuff . Take the extra , use them on a plate carrier or something else . We sell a bunch of them to go onto other Brands .

Gene

_______________________
|
B ✆
to Sales

show details Feb 5

Sounds good. Do you have a ball park time frame you think it might take to work up the new straps and pads?


B

_________________________________
|
B ✆
to Sales

show details Feb 15

Hey Gene and company,

I just wanted to touch base and see if there was any update on my shoulder straps and pads? Also, I want to buy another pouch, but need it shrunk down just a bit.

I would like to take the 2-qt pouch you already have and make it narrower by one inch as well as 1" less depth. So the dimensions would be 6.75x5x3. I'd like to have it setup to run 3 columns of PALS wide. That might mean each column is a bit wider than typical, but that is exactly what I want because I actually only want to run it on two columns the way the Warlord is currently setup. So, it would be laid out in such a way on the back that either two or three columns would suit it. Hopefully that makes sense.

Should I just buy the 2-qt pouch on the site and add the modification in the description?

I would really like to have these by March 4th if at all possible.

I really appreciate you guys! Hopefully you aren't too swamped over there, but I suppose its certainly good for business.


B

__________________
|
B✆
to Sales

show details Feb 28

Gene,

Its been a couple of weeks since our last communication so I wanted to touch base and see if you had gotten to my spot in the line yet? Any movement on the straps, pads, and pouch? I placed an actual order for the pouch that I imagine you are aware of. Just checking in.


Thanks!

B

-_______________________________

B ✆
to Sales

show details Mar 22

Hey Gene,

I understand you guys are really busy. It has been almost 60 days since I first emailed about the new pads and straps, and about 45 days since placing the order for the additional pouch. I don't mind being understanding and continuing to wait a bit longer, but I would greatly appreciate some communication as to the status of my orders.

Thanks,

B

________________________
|
B ✆
to Sales

show details Apr 9

Gene,

Can you please let me know the status of my shoulder straps as well as my other order? The number on it is 8267.


Thanks for any help.

B

_______________________

B ✆
to Sales

show details Jun 5

Gene, etc,

I placed my order for a hydration pouch with some changes back in February. Also, Gene we discussed my modified shoulder straps in January. I have spent hundreds of dollars with HSGI. I understand that may be small fries compared to a contract that covers multiple people or a whole unit, but its a lot of my hard earned money and I haven't gotten so much as a single email back in months.

Please let me know where my orders stand ASAP.

B

____________________________________

B✆
to topher

show details Oct 8

Hey Topher,

I read on professionalsoldiers.com that Gene has you working the front end these days helping field all the emails and such.

I also read that Gene is the point person for custom items, and most of my questions (if not all) are dealing with custom pieces, but I haven't heard from him in a number of months despite numerous emails so I thought I would write you.

If you get this, please email me back and let me know that you all are still around.

Thanks,

B

_______________________

As you can read, I have not had a single bit of communication since the email about how much HSGI cares about their customers and wants to get things right. In spite of this, I have continued to support their product and recently placed an order with OP Tactical for an admin pouch HSGI wouldn't respond directly to me about. I love their stuff, but am at a loss of what to think about such crap communication. Even after Gene came onto PS.com a few months ago and responded to my original complaint about missing emails, he still has not responded to me a single time. I'm not sure why I've been blacklisted, but its ridiculous to not even respond to a customer.

Buyer beware.

[eggroll]

Has this issue been addressed? I see that Topher and Gene are both on facebook and have been timely in responses back to me.