Beretta M9

[Slater]

Just bought one of the Civilian Edition M9's for use as a range plinker and general backup to my Remmy 870 for HD. My M9 won't be exposed to any adverse environments or harsh use, so it'll probably be fine for my purposes.

The M9 has to be the most bad-mouthed firearm in recent memory in US service. I've read a lot of negative feedback on this weapon and it seems to be centered on the following items:

(1) Just too damn big for what it is

(2) Can't handle sandy environments

(3) Fires a generally ineffective round

(4) High rate of parts breakage/short service life


I don't know what sidearms the SF community employs but, judging from all the negative press, I would imagine the M9 wouldn't be at the top of the list.
Has the SF had more negative than positive experiences with this particular weapon?

[The Reaper]

Could you fill in your profile before asking questions?

TR

[blue02hd]

I would have to say that when I needed my Army issued M9 it worked, and that was a generally positive experience.

I have to ask though, why would anyone pay cold cash for a HD weapon that they had so many concerns about?

[Slater]

I've got pretty much no concern about the M9 in a HD role (and it is secondary to my 870 in that regard). In fact, it gets pretty much glowing reviews from most civvie owners I know. I was curious about SF experiences with it in adverse conditions.

[The Reaper]

I wouldn't buy one, and I would rather not be issued one.

TR

[The Reaper]

Funny, I saw 3'x3' boxes full of broken slides at Mott Lake in the 80s with far fewer rounds than the article cites.

In face, I took two broken slides and two barrels with the lugs sheared off to a local gun store to show the Beretta rep who had been denying the story. He refused to take them.

The majority of the problems I have heard about recently have been bad mags/springs.

Nevertheless, most agencies I know if who adopted them have subsequently regretted it and opted out for the SIG, Glock, Smith, HK, or Springfield.

TR

[82ndtrooper]

Personally I think the Beretta is one of the better 9mm chambered pistols going, but that's just me. I have not carried it into combat, I have not been on any sustainded deployments with it, and I have not fired it under fire. (Disclaimer)

I have owned one for about 10 years now. I find it to be accurate, durable, and dependable for your specific use. I've run mine in and out of water, sand, mud, and in one case some horse shit. (That's another story for another time)

Here's an old piece, but rather inclusive to the Beretta history. Take it for what it's worth.


By Tim Chandler

“You’re not a S.E.A.L. ‘till you have eaten Italian steel…” Anonymous

Thus begins the sordid tale of the M9 that is oft repeated in gun shops and firearms related web-boards the nation over. Anyone who asks questions about the Beretta M9/92 pistol long enough will inevitably hear about how a bunch of S.E.A.L. team members were killed/maimed/deformed by the slides of the M9 pistol breaking in half and flying back at the shooter, decapitating many brave men . Or maybe you will hear about how the frames on the M9/92 pistols can shatter like plate glass if you shoot more than 1,000 rounds through them. I am sure there is somebody out there blaming the Titanic on a Beretta M9/92.

As any experienced firearms enthusiast knows, rumors run WILD in the gun world. There are more silly fads and idiotic rumors in the gun culture than there are among pre-teen girls. Sometimes the bull flows so freely that a fellow needs hip waders and a lifejacket to keep from drowning in it. Some stories, however, are true or have at least SOME grain of truth to them. The trick is being able to wade through the baloney to find the truth. With this in mind, I decided to set out in search of actual proof of the M9/92 horror stories that so many recite so freely.

The Saga Begins:

In the early 1980’s the Military began looking for a new sidearm to replace the inventory of over 25 different pistols and revolvers then in service with the military, and the more than 100 different types of ammunition for those sidearms. Chief among the inventory of pistols to be replaced was the venerable old 1911 handgun that had been in service for 70 years. According to a Comptroller General’s report (PLRD-82-42) dated 3-8-82, the military had 417,448 .45 caliber pistols in inventory. The plan began to run into opposition when it was announced that the new sidearm would be chambered in the NATO standard 9mm cartridge. Many saw the move to a smaller caliber as a step in the wrong direction. Still others questioned the need for the adoption of a new pistol at all. According to PLRD-82-42, the General Accounting Office actually recommended purchasing more .38 caliber revolvers or converting the existing 1911 pistols to fire the 9mm round as a less expensive alternative to adopting a new weapon.

The Army eventually made headway and in November of 1983 placed a Formal Request for Test Samples (FRTS) to several commercial arms makers in the US and around the world. Eight makers submitted a sample lot of 30 pistols by the deadline of January of 1984, and by August of the same year the testing was completed. (NSIAD-88-46) Of the eight makers who submitted test samples, 4 were technically unacceptable and 2 removed themselves from competition. The two surviving companies were SACO (importing Sig-Sauer pistols at the time) and Beretta. (NSIAD-88-46) After a controversial bidding process (some allege Beretta was tipped off about SACO’s bid so they could lower the per unit cost on their candidate by $1.00 and win the contract) the Army signed a contract with Beretta for 315,930 pistols. This number was later increased to 321,260 pistols. The new pistols would bear the military name of M9. (NSIAD-88-46)

The Problems Arise:

The M9 pistol program ran into trouble when in September of 1987 the slide of a civilian model Beretta 92SB pistol fractured at the junction where the locking block mates into the slide. The broken half of the slide flew back at the shooter (A member of the Navy Special Warfare Group) injuring him. (NSIAD-88-213) In January and February of 1988 respectively, 2 more military model M9 handguns exhibited the same problem, injuring 2 more shooters from the Navy Special Warfare Group.

All three shooters suffered facial lacerations. One suffered a broken tooth and the other two required stitches. (NSIAD-88-213)

The Army was doing unrelated barrel testing on current production civilian model 92SB pistols and military model M9 pistols and ran into the same slide separation issue. They fired 3 M9 pistols 10,000 times and inspected the weapons with the MPI process for evidence of slide cracks. They discovered that one of the weapons had a cracked slide. The Army then decided to fire all of the weapons until the slides failed. Failure occurred at round number 23,310 on one weapon, 30,083 on another, and 30,545 on the last weapon. (NSIAD-88-213)

Examination of the NSWG slides and the Army slides showed a low metal toughness as the cause of the problems with slide separation. The Army then began to investigate the production process of the slides. (NSIAD-88-213) At the time the frames of the M9 pistols were produced in the US, while the slides were produced in Italy. There are reportedly documents from the Picatinny Arsenal that report a metallurgical study blaming the use of Tellurium in the manufacturing process for the low metal toughness of the Italian slides, but I have been unable to independently verify this information.

After April of 1988, however, all slides for the M9/92 pistols were produced in the US. (NSIAD-88-213) As a part of the contract requirements, the Beretta Corporation had to build a plant inside the United States to produce the M9. It naturally took some time for the US plant (located in Accokeek MD.) to get into full production swing, so the Italian plant made the slides for a time.

Several GAO reports and testimony from GAO staff before Congressional Sub-Committees (NSIAD-88-213, NSIAD-88-46, NSIAD-89-59 are a few…) report the total number of slide failures at 14. Three occurred in the field with the NSWG and the other 11 occurred in the test lab. Only 3 injuries resulted from the slide separation problem. The Beretta Corporation changed the design of the M9 pistol so that even if a slide fractured, the broken half could not come back and hit the shooter causing injury.

Of the 14 slide separations reported, only 4 took place at round counts under 10,000. (NSIAD-88-213) No further slide fractures were reported after the change to the US manufactured slides.

The Beretta Corporation initially blamed the slide failures on the use of ammunition. They questioned both the use of non-NATO ammunition and the use of M882 ammunition. They suspected that both types of ammunition caused excessive pressure buildup inside the weapon causing barrel ringing issues during the initial testing of the M9 weapon and the slide separations experienced by the military. The Army determined that both barrel ringing and slide separation were caused by low metal hardness and not by any specific pressure level in the ammunition used. (NSIAD-89-59)

I have obtained documentation from a reliable source that demonstrates that the M882 ammunition was not excessive in its chamber pressures. Thus the explanation of metallurgical problems on a limited number of M9 pistols remains the only defensible conclusion.

[82ndtrooper]

Another problem that cropped up with production of the M9 pistol was a problem with frame cracks. In December of 1987 and January of 1988 routine lot testing of the M9 production pistols revealed frame cracks occurring at the rear of the grip area of the frame just above where the trigger bar rides. The Army representatives determined that the cracks did not affect the safety, reliability, or function of the weapons and were merely “cosmetic in nature.” (NSIAD-88-213)

The cracks, however, did violate the terms of the M9 contract, so the lots were rejected. Beretta continued production into February and March of 1988 with the affected frames, stockpiling them in hopes of a retrofit. In April of 1988 an engineering change was approved by Berretta and Army representatives that resolved the frame crack issues. The previously rejected lots were retrofitted with the new frame design and retested. The new frames did not display the cracking problem or any other problem during the tests and were subsequently accepted by the military. (NSIAD-88-213) There were 24,000 affected handguns produced with the defective frame. ALL of them were rejected and then retrofitted and accepted by the Army. (NSIAD-88-213)

The Magazine Controversy

Recent reports from Afghanistan and Iraq have reported less than satisfactory reliability with the M9 pistols traceable to the magazines. Until very recently, the magazines for the M9 pistol were produced by Mec-Gar. The military decided to go with another vendor, Checkmate, to supply the magazines for the M9. By all reports I have heard from the field, the new magazines are not made as well and are extremely sensitive to dirt and sand. Considering that the troops are using the M9’s in an area of the world that is populated by little else but dirt and sand, this makes the use of such magazines a bad idea.

Many soldiers have “written home” to family and friends and have managed to obtain the original production magazines made by Beretta through back channels. (The original factory magazines are of superior quality to any others I have found.) Reports have been extremely positive with the use of the original style magazines. The military has enough knowledge to understand that magazines and ammunition are the most common causes of reliability problems, and so their purchase of magazines that are not as reliable as the original production magazines is puzzling. They should resolve this by going back to the Beretta production magazines, or at least back to the Mec-Gar produced ones as soon as possible.

The 9mm Controversy:

A great deal of the hostility aimed at the M9 pistol is the result of its use of the 9mm cartridge. The military stated that its goals in searching for a new standard sidearm were to improve effectiveness, reliability, safety, and operational suitability of the sidearm over the .45 caliber pistols and .38 caliber revolvers then in use. (NSIAD-89-59)

Effectiveness is measured by range and accuracy, volume of fire, inherent lethality and lethality against body armor. Somehow the military’s study on the subject of effectiveness produced a proclamation that the 9mm NATO round was more accurate, had longer range and greater lethality inherently AND against body armor than the .45 caliber bullet. (There are some who believe this, and some who do not.) The method used to actually achieve these results is a shadowy combination of numerical calculations rather than on good hardcore scientific data like gelatin tests. (PLRD-82-42) The range and accuracy “tests” also seem to have been rigged in favor of the 9mm round by doing the measurements at 50 meters instead of 25. (The .45 caliber pistol’s sights were only regulated out to 25 meters…) It is a well known and documented fact that there are many .45 caliber 1911 pattern automatics that are capable of shooting 3” groups at 50 meters, thus one wonders how the military got the crazy idea that the .45 caliber bullet was not as accurate at that range. The idea that the 9mm NATO ball round hits harder at 50 meters than the .45 caliber round is also laughable. Certainly a 9mm weapon that can hold 15 rounds in the magazine and one in the chamber has greater CAPACITY than the 7+1 round .45 caliber pistol, but whether or not that translates into greater “firepower” is a matter of debate. (Is it better to hit someone with 3 puny rounds, or 1 round that knocks them out of the fight?)

The other measures are equally debatable. Is the M9 more reliable than the .45 caliber pistol? Well considering that many of the .45 caliber pistols in inventory had been in use through WWII, Korea and Vietnam, and that over 100,000 of them were no longer serviceable according to the military’s numbers, I am sure that a brand new pistol that had not suffered all of that abuse might indeed be a tad more reliable. (The fact that the .45 survived three nasty wars and became the favorite weapon of so many military and civilian shooters is a testament to how good a weapon it is.)

Is the M9 safer than the .45 caliber pistol? The addition of a firing pin safety in the M9 pistol does add safety should the pistol be dropped. The long heavy double action trigger does make it harder to accidentally fire the weapon through negligence, but most will agree that relying on a long heavy trigger rather than proper training to keep accidents from occurring is a poor strategy for safety. One could also argue that the heavy DA trigger makes it harder to hit an intended target when you need to, increasing the odds of missing a threat in actual combat and thus making a soldier LESS safe than with the single action 1911 pistol. Not to mention that the weaker 9mm round would not be as effective at stopping the threat coming at you if you did manage to hit it.

Another possible reason mentioned for adoption of the 9mm pistol was to make it more shooter friendly for small stature and female soldiers. While the 9mm is easier to control than the recoil of the big .45 caliber pistol, the Beretta 92 platform is ergonomically less than ideal for those smaller shooters. The wide grip and long trigger reach are WORSE for smaller shooters than the 1911 pistol with its short trigger and narrow grip.

Conclusions

The Beretta M9/92 pistol has been in service with our military for almost 20 years now. After the production problems documented previously were addressed, the pistol proved to be mechanically sound and reliable, enduring hundreds of thousands of rounds with little trouble provided proper maintenance was supplied. A redesign in the locking block of the M9 pistol made changes to that important piece less frequent, causing the pistol to require even less time at the armorer’s bench.

The M9 is far from the perfect military sidearm. The 9mm ball ammunition that our troops must use in the M9 is a dismal man-stopper by most accounts. (Some disagree) The M9 itself is a large and heavy weapon for its job. (There are other 9mm pistols that hold more ammunition and weigh a fraction of what the M9 does.) The wide grip of the M9 is too big for many shooters, and the heavy double action trigger hinders accuracy. The Beretta M9’s competitor in the trials, the Sig-Sauer P226, suffers from the same hindrances of caliber, size and trigger pull. Many of the complaints against the M9 are the result of what it is: A 9mm double action pistol. Any 9mm DA pistol would get the same treatment.

After the initial bugs were worked out, the M9 pistol developed into a reliable combat proven weapon. Most current/former military personnel that I have been privileged to speak with while researching this article have stated a general satisfaction with the weapon’s reliability while citing the concerns about the size, weight and caliber that I have mentioned already. It has saved the lives of soldiers, law enforcement officers and civilians alike over the years. It remains today an accurate and reliable weapon suitable for personal defense. Few military sidearms have proven themselves to be as good a weapon as the M9 has turned out to be, despite the gun shop gossip to the contrary.

It remains worthy of our consideration when choosing a weapon.




--------------------------------------------------------------------------------

DOCUMENTATION: All documentation cited in parenthesis is from Government Accounting Office documents. The strange number/letter combinations are the catalog numbers for these documents. You can obtain the very same documents through the GAO.

Many thanks to the numerous military personnel and others who helped me track down this information. It would have been impossible to do without your help!

[Snaquebite]

keeping magazines loaded for extended periods of time, thus compressing the spring to the point where it loses elasticity.

I saw more than a few misfeeds and failure to feeds because of this in Iraq. Not just with M9's.

EDIT: Must have screwed something up. I posted after RTK and my post appears before his.

[RTK]

The majority of the problems I have heard about recently have been bad mags/springs.

TR


After a week in Iraq, the rounds also build up a collection of dirt and grime. A lot of the magazine issues are due to people not cleaning the rounds periodically and keeping magazines loaded for extended periods of time, thus compressing the spring to the point where it loses elasticity. I kept extra magazine springs around to help mitigate this.

The other problem I had with it was in the reciever where the dirt would build up over time inside the hand grips. After a while, the hammer would not fully go back into the double action position, thus keeping the slide from its rearward position. It's 20 level maintenance (technically) to remove the hammer, which is what you need to do in order to thoroughly clean this area. I did it reguarly and personally removed the hammer mechanism for the M9s in my platoon and, later, my troop. I had the benefit of my own 92G Elite II to practice on before hand. Periodic cleaning (every two or three weeks) of that area of the weapon prevented those types of malfunctions.

Other than those two items, I never had much of a problem, though I would have preferred my Kimber .45.

[kgoerz]

I used someones Armorers course certificate to buy the Vertec. I purchased it for several reasons. One being it's a good gun. The price was right. It was the LE version. The high cap Mag ban was still in effect then. Also I knew how to operate it.
Just about everything that was wrong with the M9 Design. Was addressed with the Vertec. The Vertec has a spring loaded decocker, good bye safety. Smaller and straighter pistol Grip. Added a light Rail. Better sights. Lighter and shorter trigger. Beveled Mag Well. Heavier slide, Improved recoil spring/Guide. Couple of others I cant remember.
I put very little faith in anything I hear about a Military issued item. I have seen the M9 endurance tested. Nothing test a pistol like putting it in the hands of students. At SOT School for two years. There were the usual cracked locking Blocks. I believe about two or three slides a year. Could the Army have done better, maybe. But the M9 is far from the piece of junk it's made out to be.

[82ndtrooper]

Just this year, a couple of months ago, I ordered some Mec Gar mags for the Beretta M9. Disapointed to say the least. If Mec Gar is still manufacturing the factory mags, then Mec Gar IS NOT selling those to the public off of their online site.

My mags direct from Mec Gar are not the factory supplied mags. They are shiny, glossy black finish. Almost like a nickel finish, but black with an aluminum baseplate and weaker mag spring. Not what I expected since Mec Gar is the designated manufacturer for Beretta and Sig.

If you can find Beretta factory mags then purchase them. They have the plastic baseplate that acts like an extended plate, and they are of the non-corrosive finish with a +10% mag spring.

I found them here: They come packaged as pictured in the Beretta factory packaging. Not tricks.

http://www.gilbertsguns.com/Clips-Magazines/High+Capacity/Beretta/Beretta+92FS+15+Shot+Magazine+Factory+Mag

[Fiercely Loyal]

I was experiencing a failure to feed problem with my Model 92. I had 10 or so mags acquired from our unit that I loaded, and used in a recently cleaned model 92. Funny thing was that every 2, 3, or 4 rounds it wouldn’t feed. The ammo I was using was factory Remington FMJ loads. Bang, bang, nothing. I would change mags and try again. Same problem but a different number of rounds were fired. So it was torn apart and cleaned on the range and mags were downloaded and cleaned. Reloaded everything and went to shoot again. I had the same problem as before. I figured I must be limp wristing it and changed grip. This didn’t solve the problem and another shooter fired the weapon and had the same problem. Does this type of failure sound familiar at all?

I ended up trading the handgun away as part of a deal for an M1-A National Match, but this problem still bothers me.

[Fiercely Loyal]

Was your 92 an NIB or used trade in ?

How many rounds have been thrown through the weapon ?

Did you change out the recoil spring and guide rod ?


It was NIB when I got it. I put approx 800-1000 rounds thru it before I had problems and no weapon components were replaced. The failure was to even get into the feeding ramp. Directly from the mag the round would stop against the magazine well.

[82ndtrooper]

I was experiencing a failure to feed problem with my Model 92. I had 10 or so mags acquired from our unit that I loaded, and used in a recently cleaned model 92. Funny thing was that every 2, 3, or 4 rounds it wouldn’t feed. The ammo I was using was factory Remington FMJ loads. Bang, bang, nothing. I would change mags and try again. Same problem but a different number of rounds were fired. So it was torn apart and cleaned on the range and mags were downloaded and cleaned. Reloaded everything and went to shoot again. I had the same problem as before. I figured I must be limp wristing it and changed grip. This didn’t solve the problem and another shooter fired the weapon and had the same problem. Does this type of failure sound familiar at all?

I ended up trading the handgun away as part of a deal for an M1-A National Match, but this problem still bothers me.



How many rounds had been thrown through the weapon ?

Did you change out the recoil spring and guide rod ? ( I prefer a steel guide rod to the plastic)

Steel guide rods can be found here :

http://www.brownells.com/aspx/ns/store/ProductDetail.aspx?p=16501&title=BERETTA+92%2F96+RECOIL+GUIDE+ROD

I change out the recoil spring every 4,000 rounds. I have yet, in civillian conditions and some harsh conditions to have any failures with my 92fs. I have fired every imaginable 9mm Luger ammunition through mine and I have only had possibly 3 or 4 failures to feed in 10 years. That was a bone dry weapon and only took a couple of drops of CLP to cure it at that particular shoot.

A weak recoil spring is likely the culprit along with bad mag springs. Were these "stovepipes" or other type failures ?

[Slater]

The following article is somewhat dated and was fished off the Net. It's an obviously pro-Beretta type doing a "shoot it 'til it breaks" endurance test. Any modern, quality handgun would probably have done as well, and one of my buddies (who's a 1911 fan) told me after reading the article that "Hell, your average 1911 could have passed that test without breaking ANY parts". So take it for what it's worth:




"The Beretta 92FS," by Christopher Bartocci...
...published in Krause Publications' Handguns 2001(13th Edition), states the following information:

"With the gun's major criticisms in mind, I wanted to see how the M9/92FS would stand up to a 20,500 round torture test using mostly +P and +P+ ammunition. I purchased a stock 92FS from a local gun distributor and made some calls for some high-power ammunition. The ammunition used in this test is as follows: 9X19mm (NATO, Parabellum/Luger) manufactured by Winchester/Olin Corporation.

Beretta U.S.A. claims their pistol is serviceable to 35,000 rounds and that it will function under the most adverse conditions. Beretta U.S.A. claims 'the average reliability of all M9s tested at Beretta U.S.A. is 17,500 rounds without stoppage.' The ammunition I chose was the hottest ammunition available and I would not recommend anyone put high round counts of +P+ ammunition through any alloy-frame pistol regardless of manufacturer.

The first thing I did was fire for out-of-the-box accuracy, I used the 115-grain +P+ ammunition and at 15 yards the 15-shot group measured 1.5 inches. I had nine magazines loaded up and someone loading magazines as I emptied them and, within 20 minutes, I fired 500 rounds with no malfunctions of any type...

The next day I began firing 2,000 rounds of the 127-grain +P+SXT, by far the hottest 9mm ammunition I have ever fired. There were no malfunctions of any type using this ammunition. Over the next 3 days I fired 8,000 rounds of 9mm NATO, the standard M882 Ball ammunition issued to U.S. military personnel. The M882 ball cartridge is rated as a +P cartridge by SAAMI specifications.

The barrel was cleaned every 2,000 to 3,000 rounds. It would take us 45 to 50 minutes to fire 1,000 rounds and, at times, the pistol would become too hot to handle. I fired 1,000 rounds of Winchester USA 115-grain 9mm ball with no problems and the pistol, after 11,500 rounds, was still delivering groups in the 1.5-inch range.

At this point, the pistol was totally disassembled and cleaned. Then I fired an additional 6,000 rounds of the 115-grain FMJ with only one malfunction. There was one failure to extract due to an under-powered cartridge, not the pistol.

After about 15,000 rounds I began to notice some pitting on the right wing of the locking block. I recommend changing this part when pitting is noted, but this was a torture test and we wanted to see how long the gun will last.

As of now 17,500 rounds have been fired and I headed back to the range to fire the remaining 3,000 rounds. Finally at round count 19,498, I had a locking block failure. The left wing of the locking block broke and the pistol's slide locked up. By pushing down on the broken wing with a drift punch, the action was freed and the pistol subsequently disassembled, revealing some minimal frame damage - but nothing that would affect the operation of the pistol. I changed the locking block and within 10 minutes I was back in action and concluded the test with no other malfunctions. The last 15 rounds were fired for accuracy; the group measured about 1.75 inches at 15 yards. The accuracy had hardly changed at all.

The locking block survived 19,948 rounds, which included 2,500 rounds of +P+, 8,000 rounds of +P and 10,000 rounds of standard 9mm ball. One friend of mine put it best: 'You fired $4,000 worth of ammunition out of a $450 handgun and broke a $60 part after 19,498 rounds were fired, what more could you ask?'

I feel very few pistols will ever see this round count - except for a military pistol. For many years I have heard people claim the Beretta M9/92FS was a fragile gun because of those early, isolated incidents. Following this torture test, I know this gun is far from fragile! There is no question in my mind the pistol is serviceable to 35,000 rounds; I would not be surprised to see it last 50,000 rounds. The Beretta M9/92FS is, in my opinion, one of the most reliable firearms ever produced - and this test proved it."

[The Reaper]

1. A Beretta 92FS is NOT an M-9, no matter how much it looks like it.

2. The military was no longer procuring M-9s as of 2001 AFAIK, and we have to live with the older M-9s that Beretta sold the USG, with all of their defects. I would expect the version produced after 20 years of production to be better.

3. The hottest 9mm ammo I have ever seen was some steel jacketed SMG ammo. The Israeli TZZ was next. Nevertheless, the M882 Ball is what is issued, and what should have been shot.

4. I have personally handled broken parts from M-9s with less than 1,000 rounds of M882 Ball through them. To wit, broken slides and barrels with sheared locking lugs. Not heard from someone, not read, personally saw it and put my hands on them.

5. Finally, you will have to search hard to find an article in any way critical of a gun that appears in a gun mag with paid advertising. I had a Remington rep tell me recently that the gun rags would never say a bad word no matter how flawed the weapon or ammo. The article might get rewritten by the editor or tossed into the trash can, but would never make it to publication.

HTH.

TR

[Slater]

Reaper;

I was under the impression that the 92FS and M9 were essentially identical (at least from a side-by-side examination). What are the differences? Is one better made than the other?

[The Reaper]

Reaper;

I was under the impression that the 92FS and M9 were essentially identical (at least from a side-by-side examination). What are the differences? Is one better made than the other?

One is made for the government, the other is a newer model made for civilians with lawyers.

TR

[Trip_Wire (RIP)]

One is made for the government, the other is a newer model made for civilians with lawyers.

TR


I like that one TR!

:D :) :D

[82ndtrooper]

Point # 5 on The Reapers should be a clue to anyone that still reads or subcribes to "Combat Tactics" "Combat Handguns" "Swat Weapons" etc, etc, etc.

I've discontinued my only subscription this year. Most if not all articles are widely open to interpretation by the personal shooter and let's not forget that advertising dollars have corrupted what was at one time some decent mags for keeping up on new pistols, ammo, rifles and gear.

Surefire now has "Combat Tactics" It's expensive, like $8.99 per issue, and you'll alway's find that 20 pages are directed at "White Light" issues, tactics, and what light to purchase for your specific use. There's more advertisments than dialogue. I agree, Surefire makes the best lights, but I dont need to pay $8.99 to be reminded of it.

[Slater]

Beretta is evidently still selling M9's to the Military, although in the "M9A1" variant (basically a standard M9 with an accessory rail, it seems). The Marines ordered a bunch last year.

[The Reaper]

Beretta is evidently still selling M9's to the Military, although in the "M9A1" variant (basically a standard M9 with an accessory rail, it seems). The Marines ordered a bunch last year.

Congratulations.

Have we flogged this to your satisfaction yet?

TR

[USMS8504]

You asked for SF opinions, you got some very qualified opinions. You were not happy with them so you keep trying to justify your purchase to yourself. What more do you want?

You brought in the Marines, so here I am. I can tell you from 5 years of ground pounding in the Corps, I never met a Marine that would carry the M9 by choice. By Beretta's own press release, they state they sold 7,500 guns to the Corps. That does not sound like a Corps wide distribution. That sounds like they needed an additional amount to suppliment the current inventory that is going to the melting pot due to failures until the joint pistol contract is kick started again.

http://www.berettausa.com/media/download.cfm?d_id=139

Additionally in the press release they state that they have sold over 10,000 of the M9A1s in 2006 between the Marines and Law enforcement. That means, minus the Marines, they have sold 2,500 to law enforcement. Compare that number to Glock or Sig. I can tell you that my small agency has bought more than that number from Glock. And we are one of the smallest Federal Agencies.

Edit Add:
I hate not saying anything good about a topic to give both sides. I got very good at IA drills with the M9.

[Team Sergeant]

Point # 5 on The Reapers should be a clue to anyone that still reads or subcribes to "Combat Tactics" "Combat Handguns" "Swat Weapons" etc, etc, etc.

I've discontinued my only subscription this year. Most if not all articles are widely open to interpretation by the personal shooter and let's not forget that advertising dollars have corrupted what was at one time some decent mags for keeping up on new pistols, ammo, rifles and gear.

Surefire now has "Combat Tactics" It's expensive, like $8.99 per issue, and you'll alway's find that 20 pages are directed at "White Light" issues, tactics, and what light to purchase for your specific use. There's more advertisments than dialogue. I agree, Surefire makes the best lights, but I dont need to pay $8.99 to be reminded of it.

Glad to see you're off the "koolaid".;)

Funny how most of the people writing the "combat tactics" have never actually been in combat.........

Team Sergeant

[82ndtrooper]

Glad to see you're off the "koolaid".;)

Funny how most of the people writing the "combat tactics" have never actually been in combat.........

Team Sergeant

I've read every single one of your posts. I don't need a publication from the grocery store anymore.

[RTK]

Beretta is evidently still selling M9's to the Military, although in the "M9A1" variant (basically a standard M9 with an accessory rail, it seems). The Marines ordered a bunch last year.


If you're looking for validation or consent that you made the right decision to buy a Beretta, then you made the wrong decision to come here. You bought a pistol. Congratulations. Thanks for letting us know.

I agree with TR; this horse is dead.

[Kyobanim]

No sense in watching the innards spill out of the horse.